Intimidator's tuning parts

[daewooluvr]

Looks good so far. Maybe I'll do something with the 1.6L but we'll see.

[daewooluvr]

Intimidator big-bored throttle body for 1.5L or 1.6L

This is remachined from genuine parts
Available for Daewoo 1.5L & 1.6L engine
The genuine parts has 50mm of inner diameter,
but you can take 58 or 65mm of inner diameter with your choice.
Gasket included.
Sales price 150,000 WON(around 150 USD)

I am interested in this. What does it mean you can take 58 or 65mm? how can you make a 65mm out of a 50mm? there just isn't enough material to take off that much. Please advise.

Also, I would be interested in a pic of it looking at the throttle wheel. I'm curious if it's pressed in like the stock ones or if it is replacable. I would like to replace it with something bigger and better.

[BCC423]

im interested in that tb(throttle body) 150 usd, what power improvements should i see? my friend got his tb remachined and it took 2 seconds off his 0-60 on a 99 dodge dakota v6

[pehN]

Aren't there any parts for the 1.4 Lanos?

[Deathwind]

One of the greatest exhaust line maker, 7ism's LDB Dual special line for Lanos. The exhaust pipe is 50.8pi, and 54pi LDB-NU Muffler.
It's quiet as OEM and great sound.
And also after the installation the nubira hatchback with 2.2L engine swaped. It had improved 20hp.

The price is about 800 USD

PS. For other kind of mobiles, ask us.

[greentrep94]

Intimidator high cam shaft for Daewoo 1.8 & 2.0 liter engine

Made by WEBCAM in U.S

------------------------------------
valve timing information
------------------------------------
: in : ex :
------------------------------------
valve lash : stock : stock :
------------------------------------
valve lift : .352 : .352 :
------------------------------------
duration : 230 ˚ : 230 ˚ :
------------------------------------
duration @.50 : 200 ˚ : 200 ˚ :
------------------------------------
lobe center : 110 ˚ : 110 ˚ :
------------------------------------

Intake open angle -10˚ before tdc Exhaust 30˚ before bdc
Intake close angle 30˚ after bdc Exhaust -10˚ after tdc

Valve timing is checked with zero valve lash @.50 inches of valve lift

Sales price 1.199,000 WON

(The graph showing data of the Chassis dynamometer
and it would be slightly changed by the various factors
It is confirmed as Approx. 184hp when it appeared by the motor company)

im guessing this would work on the forenza. how much in US dollars?

[asam]

Any parts for the leganza's 2.2?

[Deathwind]

Hello

We finally manged to finish and start manufacturing the 2.0L turbo package

Here are the list of the items that are included in the package.

Turbine: TD05

Intercooler: Custom ordered from Powercore

Metal Gasket for turbo: which lowers C/R custom ordered

MAP sensor: for 2.5 bar

Headers: Custom ordered from Maintech

Intake pipes: Made by Intimidator

Injector: 600cc

Blow off valve: Made by turbotech

ECM: SAM2000(Road mapping)

We think of it 200 WHP(Wheel horse power. Chassis dyno)

The price is about 3800USD(It depends on cureency)

[Deathwind]

This brake system includes 2-pot brake caliper and 11" rotors.

It can be installed in Lanos or other Daewoo old mobiles.

PS. The 2-pot brake systems for other mobiles are available too.

[Deathwind]

This one is for 1.8L, 2.0L, 2.2L engine



This one is for Lacetti/Forenza only.

[ricemill]

do you have anything for 2.2 cams and dyno results. dohc

[Deathwind]

The dyno graph of 148.5 hp is the one for 2.2L engine.

[ricemill]

whats the price on them

[ricemill]

in us dollars and is there anything you need to do on the ecm. im new to modding these computer cars. IM USED to the early models. NO REPLACEMENT FOR DISPLACEMENT.

[Deathwind]

1200USD without shipping.

And it does not need ECU mapping.

Because duration didn't change a lot.

But lift of valve became more higher.

Thank you.