first 1/4-mile result
Moderators: daewoomofo, Moderators Group
- Roadrunner 16V
- Posts: 38
- Joined: Sun Mar 27, 2005 11:24 am
- Location: Bad Wilsnack
- Contact:
first 1/4-mile result
Hello together,
this week was my Vectra finished and yesterday was already first 1/4-mile runs. I am very content. My time was 12.685 seconds with 175km/h. 60 feet time was 1.798 seconds, 1/8-mile time was 8.176 seconds with 138km/h.
this week was my Vectra finished and yesterday was already first 1/4-mile runs. I am very content. My time was 12.685 seconds with 175km/h. 60 feet time was 1.798 seconds, 1/8-mile time was 8.176 seconds with 138km/h.
Last edited by Roadrunner 16V on Mon Jul 04, 2005 2:19 pm, edited 1 time in total.
- Roadrunner 16V
- Posts: 38
- Joined: Sun Mar 27, 2005 11:24 am
- Location: Bad Wilsnack
- Contact:
Hello!
Thanks first times.
The car is an empty OPEL Vectra Turbo. The all-wheel drive was converted by Visco clutch on lamellas slide clutch. I can adjust the strength distribution steplessly from 100:0 (FWD) to 50:50 (full AWD).
The engine is a C20LET with steel piston rod and forging piston for a reduced compression and piston head cooling. The crankshaft was facilitated and fine-heaved. The turbocharger was changed by K24 compressor wheel on K26 compressor wheel. At present I have approximately 310hp and 450Nm torque. The intercooler is from the AUDI RS2. I built the exhaust with 3 inch pipes themselves.
I will make times photos. Perhaps I get also a few videos of the meeting.
EDIT: her the Time-slip klick here
Thanks first times.
The car is an empty OPEL Vectra Turbo. The all-wheel drive was converted by Visco clutch on lamellas slide clutch. I can adjust the strength distribution steplessly from 100:0 (FWD) to 50:50 (full AWD).
The engine is a C20LET with steel piston rod and forging piston for a reduced compression and piston head cooling. The crankshaft was facilitated and fine-heaved. The turbocharger was changed by K24 compressor wheel on K26 compressor wheel. At present I have approximately 310hp and 450Nm torque. The intercooler is from the AUDI RS2. I built the exhaust with 3 inch pipes themselves.
I will make times photos. Perhaps I get also a few videos of the meeting.
EDIT: her the Time-slip klick here
-
- Expert
- Posts: 3772
- Joined: Wed Oct 20, 2004 4:47 am
- Location: USA, Arizona
- Contact:
wow! That must be a very fun car
www.KinkyMotorsports.com
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
-
- Expert
- Posts: 3772
- Joined: Wed Oct 20, 2004 4:47 am
- Location: USA, Arizona
- Contact:
I agreeMe wrote:i think we should sticky a 1/4 post up of peoples times
www.KinkyMotorsports.com
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
- Roadrunner 16V
- Posts: 38
- Joined: Sun Mar 27, 2005 11:24 am
- Location: Bad Wilsnack
- Contact:
here is 1 video from last weekend
it?s the white car. the run was a 13,0s with 172km/h
http://dl3.rapidshare.de/files/3219010/ ... ner16V.wmv
scroll down,klick "free" and wait for download-link
it?s the white car. the run was a 13,0s with 172km/h
http://dl3.rapidshare.de/files/3219010/ ... ner16V.wmv
scroll down,klick "free" and wait for download-link
-
- Expert
- Posts: 3772
- Joined: Wed Oct 20, 2004 4:47 am
- Location: USA, Arizona
- Contact:
cool!
www.KinkyMotorsports.com
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
- Roadrunner 16V
- Posts: 38
- Joined: Sun Mar 27, 2005 11:24 am
- Location: Bad Wilsnack
- Contact:
-
- moron
- Posts: 4493
- Joined: Wed Dec 08, 2004 5:18 am
- Location: Knoxville, Tennessee
- Contact:
- Roadrunner 16V
- Posts: 38
- Joined: Sun Mar 27, 2005 11:24 am
- Location: Bad Wilsnack
- Contact:
-
- Expert
- Posts: 3772
- Joined: Wed Oct 20, 2004 4:47 am
- Location: USA, Arizona
- Contact:
How do you start anyways? Do you just hold a certain rpm and let the clutch go and go full throatle? Ive never needed to be good at the starts for the kinda racing i do but i wanna go to the drag strip soon
www.KinkyMotorsports.com
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
- Roadrunner 16V
- Posts: 38
- Joined: Sun Mar 27, 2005 11:24 am
- Location: Bad Wilsnack
- Contact:
videos 2006
here some videos of 2006. http://www.myvideo.de/online/page.php?l ... UID=268719
Best times are
60ft :1,696s
1/8 :7,519s
1/4 : 11,738s
186km/h
Best times are
60ft :1,696s
1/8 :7,519s
1/4 : 11,738s
186km/h