Car Audio, Controllers, Wiring, Seats, Carpet, Interior painting, and more...
Moderators: daewoomofo , Moderators Group
pehN
Super
Posts: 240 Joined: Tue Jun 22, 2004 7:54 am
Location: Heidelberg, GERMANY
Post
by pehN » Fri Jul 15, 2005 11:56 pm
Does anyone know where I can get plasma guages for the Lanos with no Tacho? I've onle seen some with Tach.
GsiTurbo
Super Moderator
Posts: 1791 Joined: Thu Mar 13, 2003 10:56 pm
Location: Edmonton, Alberta, Canada
Contact:
Post
by GsiTurbo » Sat Jul 16, 2005 12:08 am
I remeber seeing a pic a while ago of Lanos with the Kadett GSI digi dash conversion. You can get tons of those in germany.
__________________________
2002 Lanos 1.5 SOHC... stock!!!
pehN
Super
Posts: 240 Joined: Tue Jun 22, 2004 7:54 am
Location: Heidelberg, GERMANY
Post
by pehN » Sat Jul 16, 2005 12:22 am
I don't like the Kadett Digital Dash!
I was thinkin of something like that but thats for the +99 Version.
Audacity Racing
moron
Posts: 4493 Joined: Wed Dec 08, 2004 5:18 am
Location: Knoxville, Tennessee
Contact:
Post
by Audacity Racing » Sat Jul 16, 2005 12:28 am
do you just want indeglo gauges???
pehN
Super
Posts: 240 Joined: Tue Jun 22, 2004 7:54 am
Location: Heidelberg, GERMANY
Post
by pehN » Sat Jul 16, 2005 12:30 am
Yes! Actually something like that would really satisfy me!
Audacity Racing
moron
Posts: 4493 Joined: Wed Dec 08, 2004 5:18 am
Location: Knoxville, Tennessee
Contact:
Post
by Audacity Racing » Sat Jul 16, 2005 12:35 am
why not get iridescent paint (it glows under uv light/black light) and paint the gauges... then use uv led's to light the gauge face from the front and bright blue wedge bulbs from teh rear?
it sounds kinda complicated, but it wouldn't be too bad, especially like that last picture...
i'm willing to help if you want!
pehN
Super
Posts: 240 Joined: Tue Jun 22, 2004 7:54 am
Location: Heidelberg, GERMANY
Post
by pehN » Sat Jul 16, 2005 12:37 am
Sounds good but I don't think it's that easy to get the lines that clear and even.
pehN
Super
Posts: 240 Joined: Tue Jun 22, 2004 7:54 am
Location: Heidelberg, GERMANY
Post
by pehN » Sat Jul 16, 2005 12:50 am
What I'm also looking for are these Strut Bars with flat sheet metals and holes in it. But I don't want to make a new Thread for it!
lanos2001
Expert
Posts: 4245 Joined: Thu Sep 30, 2004 9:35 pm
Location: lawton oklahoma
Post
by lanos2001 » Sat Jul 16, 2005 12:54 am
what kind of strut bars are you talking about? pics?
nick
save a tree, eat a beaver.
pehN
Super
Posts: 240 Joined: Tue Jun 22, 2004 7:54 am
Location: Heidelberg, GERMANY
Post
by pehN » Sat Jul 16, 2005 1:00 am
Something like that.
But I've never seen one for the Lanos. And making holes into the sharkracing strut bar would make it unstable!
lanos2001
Expert
Posts: 4245 Joined: Thu Sep 30, 2004 9:35 pm
Location: lawton oklahoma
Post
by lanos2001 » Sat Jul 16, 2005 1:06 am
to me holes in it makes it unstable on any application. i don't think they're speed holes or make it lighter by too much. the rolled lips on that one might compensate a little for more strength but i still think thats a bad way to design something. does look kinda cool though.
but yeah i've never seen one made for the lanos or any daewoo that i know of.
nick
save a tree, eat a beaver.