Dyno run

General, Humor, Post here everything that doesn't belong in any of the other forums.

Moderators: daewoomofo, Moderators Group

Locked
Efratech
Admin
Posts: 2280
Joined: Wed Oct 30, 2002 6:41 pm
Location: Dominican Republic
Contact:

Dyno run

Post by Efratech »

I went to the Dyno this afternoon....

did 2 runs:

the frist got 132.3 WHP and 120.3 lb.ft of torque
and 2nd. got 135 WHP and 120.4 lb.ft of torque

I got a small vid and some pics wich i will upload later.

Efrain.
'88 Pontiac Lemans GTE - 2.0 16v XE - fully programable ECU, Custom made intake manifold and other bits.
146.6WHP/135lb.ft - 14.81@94mph
Efratech
Admin
Posts: 2280
Joined: Wed Oct 30, 2002 6:41 pm
Location: Dominican Republic
Contact:

Post by Efratech »

doing a quick math... at the flywheel it should be around the

162 HP and 144 lb.ft... honestly i was expecting at least 140 whp, but the ecu is not fully tuned yet.
'88 Pontiac Lemans GTE - 2.0 16v XE - fully programable ECU, Custom made intake manifold and other bits.
146.6WHP/135lb.ft - 14.81@94mph
kinkyllama
Expert
Posts: 3772
Joined: Wed Oct 20, 2004 4:47 am
Location: USA, Arizona
Contact:

Post by kinkyllama »

thats still great!


videos rule too! :D
www.KinkyMotorsports.com
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
Efratech
Admin
Posts: 2280
Joined: Wed Oct 30, 2002 6:41 pm
Location: Dominican Republic
Contact:

Post by Efratech »

here's the small vid

http://www.daewootech.com/pics/proyect/ ... V03908.MPG

the quality is kinda low but the sound is very good.
'88 Pontiac Lemans GTE - 2.0 16v XE - fully programable ECU, Custom made intake manifold and other bits.
146.6WHP/135lb.ft - 14.81@94mph
04aveohb
Junior
Posts: 129
Joined: Sat May 14, 2005 2:56 am
Contact:

Post by 04aveohb »

nice, I like watching dyno's
2004 Chevy Aveo LS Hatchback
-SRI
-15" Konig Theory's
Locked