Saturday 18

General, Humor, Post here everything that doesn't belong in any of the other forums.

Moderators: daewoomofo, Moderators Group

Efratech
Admin
Posts: 2280
Joined: Wed Oct 30, 2002 6:41 pm
Location: Dominican Republic
Contact:

Saturday 18

Post by Efratech »

This next week the car is booked to be mapped.

Im trying to get some nice grippy tires and go to the drag strip on June 18. :wink:

Let see how it does. :roll:

Efrain.
'88 Pontiac Lemans GTE - 2.0 16v XE - fully programable ECU, Custom made intake manifold and other bits.
146.6WHP/135lb.ft - 14.81@94mph
kinkyllama
Expert
Posts: 3772
Joined: Wed Oct 20, 2004 4:47 am
Location: USA, Arizona
Contact:

Post by kinkyllama »

sweet!!! :D
www.KinkyMotorsports.com
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
Efratech
Admin
Posts: 2280
Joined: Wed Oct 30, 2002 6:41 pm
Location: Dominican Republic
Contact:

Post by Efratech »

Some news,

The car will be mapped tomorrow morning... :) 8)

at 6pm i will be on the drag strip to see how it does.

Efrain :wink:
'88 Pontiac Lemans GTE - 2.0 16v XE - fully programable ECU, Custom made intake manifold and other bits.
146.6WHP/135lb.ft - 14.81@94mph
User avatar
AcingTeam
Expert
Posts: 2700
Joined: Thu Jun 17, 2004 2:48 am
Location: New Milford, CT
Contact:

Post by AcingTeam »

Can't wait... are you going to push it hard this time?
Image
Efratech
Admin
Posts: 2280
Joined: Wed Oct 30, 2002 6:41 pm
Location: Dominican Republic
Contact:

Post by Efratech »

Hi,

i spent all day doing some minor adjustments to the car before it could be mapped.

at 4 pm the car was not mapped, my mechanic is sick with some flu, at 5pm he calls me to pic him up to map the car :D

we installed the wideband and all the mapping stuff, and got it mapped a bit on the street (less then 1 hour), he started to get sick again and we went home. so the map i dare to say is at 85%-90%.

Well went to the track, and everybody loved the car, did 6 runs, again with lots of wheel spin, my best was a 15.4 (2 times) and the others 15.5 and one 15.6, there was a problem with the printer so i didnt get the prints, but i looked at my speed a couple of times and i was crossing the line around 160 kmh (100 mph) wich is good for a 15.0-15.1. i need to work on the suspension now.

Anyways in very pleased with the car?s performance 8)

Efrain.
'88 Pontiac Lemans GTE - 2.0 16v XE - fully programable ECU, Custom made intake manifold and other bits.
146.6WHP/135lb.ft - 14.81@94mph
User avatar
BosnianLanos
Expert
Posts: 1661
Joined: Thu May 27, 2004 10:31 pm
Location: Clearwater, Florida
Contact:

Post by BosnianLanos »

Very good for a naturally aspirated engine :D .

Do you plan to run turbo or NOS or will you stay with N/A and see what you can get out of it?
User avatar
AcingTeam
Expert
Posts: 2700
Joined: Thu Jun 17, 2004 2:48 am
Location: New Milford, CT
Contact:

Post by AcingTeam »

Awesome!! What is that engine rated stock in hp?
Image
Efratech
Admin
Posts: 2280
Joined: Wed Oct 30, 2002 6:41 pm
Location: Dominican Republic
Contact:

Post by Efratech »

Acing, is rated at 150hp and 145 lb.ft of torque at the flywheel

some pics:

Image

just getting the green light.

Image

i know its dirty as hell.
'88 Pontiac Lemans GTE - 2.0 16v XE - fully programable ECU, Custom made intake manifold and other bits.
146.6WHP/135lb.ft - 14.81@94mph
woo
Expert
Posts: 769
Joined: Fri Sep 10, 2004 12:12 pm
Location: AUSTRALIA

Post by woo »

are you going to stiffen up the rear in an attempt to make the weight transfer to the rear less?
330w carbon kevlar
Image
you'd better believe thats a paddlin

"a woman is like a refridgerator, bout 6ft tall, 300 pounds........."
Efratech
Admin
Posts: 2280
Joined: Wed Oct 30, 2002 6:41 pm
Location: Dominican Republic
Contact:

Post by Efratech »

Woo...

Yes im gonna do that.
'88 Pontiac Lemans GTE - 2.0 16v XE - fully programable ECU, Custom made intake manifold and other bits.
146.6WHP/135lb.ft - 14.81@94mph
woo
Expert
Posts: 769
Joined: Fri Sep 10, 2004 12:12 pm
Location: AUSTRALIA

Post by woo »

Image





you not gunna play with a wheely bar to keep the front treads planted??
330w carbon kevlar
Image
you'd better believe thats a paddlin

"a woman is like a refridgerator, bout 6ft tall, 300 pounds........."
Efratech
Admin
Posts: 2280
Joined: Wed Oct 30, 2002 6:41 pm
Location: Dominican Republic
Contact:

Post by Efratech »

:lmao: its road car, not a drag car :P
'88 Pontiac Lemans GTE - 2.0 16v XE - fully programable ECU, Custom made intake manifold and other bits.
146.6WHP/135lb.ft - 14.81@94mph
User avatar
mocpac
Moderator
Posts: 3385
Joined: Sat Jun 14, 2003 9:24 pm
Location: Puerto Rico
Contact:

Post by mocpac »

woo wrote:Image


you not gunna play with a wheely bar to keep the front treads planted??
Isthat a HONDA DEL SOL? or a CRX?
ImageImage
User avatar
lanos2001
Expert
Posts: 4245
Joined: Thu Sep 30, 2004 9:35 pm
Location: lawton oklahoma

Post by lanos2001 »

the they're both the same. in the states the del sol is the replacement for the CRX just different names. i believe in like europe and stuff its still known as a CRX with the del sol body. or someone just switched badges.

nick
Image

save a tree, eat a beaver.
woo
Expert
Posts: 769
Joined: Fri Sep 10, 2004 12:12 pm
Location: AUSTRALIA

Post by woo »

over here they are just called crx's, nothing fancy
330w carbon kevlar
Image
you'd better believe thats a paddlin

"a woman is like a refridgerator, bout 6ft tall, 300 pounds........."
Locked