any 1 know if this is a lanos ?

woo_sleeper · Post by **woo_sleeper** » Sun May 29, 2005 4:31 pm

hey guys from wat i know and found is that i can get a oil feed from the oil psi sensor or put a sandwich adapter on the oil filter , so where is this feed from and is this a lanos ?

KnightWalace · Post by **KnightWalace** » Sun May 29, 2005 5:08 pm

Peanut butter and Jelly, or ham and cheese?

woo_sleeper · Post by **woo_sleeper** » Sun May 29, 2005 5:22 pm

KnightWalace wrote:Peanut butter and Jelly, or ham and cheese?

wats ur POINT

i asked a simple Q......

BosnianLanos · Post by **BosnianLanos** » Sun May 29, 2005 6:44 pm

I'm gonna say that isn't a Lanos 1.5 or 1.6. I saw it on an earlier post and it is most likely a factory turboed engine like a C20GET or LET.

MMamdouh · Post by **MMamdouh** » Sun May 29, 2005 6:46 pm

not so long ago someone came across this issue... i think it is in the thread where debo is rebuilding his engine.

their is some port wherer you can get oil feed and some other port that you can get coolant feed... in that pic the port is so close to the water pump so i recon this is a coolant feed but i am not sure.

dig up for that post ( i guess in the engine section of the forum) and you will find pics and illustration for both ports.

MMamdouh

woo_sleeper · Post by **woo_sleeper** » Mon May 30, 2005 2:31 am

ok does any1 know any where on the lanos block where u can take a oil feed besides the oil psi sensor and oil filter

MMamdouh · Post by **MMamdouh** » Mon May 30, 2005 8:20 am

i am guessing here so don,t take this for granted OK?

you can see the thermostate housing and the outlet pipe on the left side of the engine... about 10 to 15 cms down their is a plug that blocks what seems to be an oil line or so... it actually looks very much like the ones on the pics you posted byt i am not sure if it is an oil feed or coolant feed.

you can give it a try and take off the plug and see if it has coolant or oil... needless to say you have to do this with the engine off.

MMamdouh