PR lanos angel eyes

mocpac · Post by **mocpac** » Sun May 01, 2005 2:40 pm

This are the angel eyes in the lanos of Jorge from PR, this was taken in the proses, latter I will post a better one.

later today I will post Rusty2k angel eyes.

AcingTeam · Post by **AcingTeam** » Mon May 02, 2005 1:58 am

That's hot.

jorge · Post by **jorge** » Mon May 02, 2005 2:00 am

thats is my car thank you

AcingTeam · Post by **AcingTeam** » Mon May 02, 2005 2:03 am

How do you guys make them? Do these angel eyes connect with the parking lights?
Nice mod Jorge!!

jorge · Post by **jorge** » Mon May 02, 2005 2:06 am

I connect the angel eyes to the parking lights.

AcingTeam · Post by **AcingTeam** » Mon May 02, 2005 2:09 am

jorge wrote:I connect the angel eyes to the parking lights.

That's what I thought... but how do you mount them so they stay still inside the headlight?

jorge · Post by **jorge** » Mon May 02, 2005 2:12 am

I open the headlights. For paint them. And put the angel eye, inside the headlight

Audacity Racing · Post by **Audacity Racing** » Mon May 02, 2005 2:40 am

you must to a how-to on it... i want them sooooooooo bad

AcingTeam · Post by **AcingTeam** » Mon May 02, 2005 2:43 am

Audacityracing wrote:you must to a how-to on it... i want them sooooooooo bad

I don't think it's hard at all... Open the headlights, mount the angel eyes, connect the wiring with parking lights, that's it.
They do sell angel eye kits on eBay... but they're around 50 bucks

If I find a cheap one... for around 20 bucks, I'll make a how-to.

DomWoo · Post by **DomWoo** » Mon May 02, 2005 2:57 am

go to walmart and buy a mini blind solid rod and get a blow torch and a round bowl or something.. make it round and drill the holes for the leds and your done your done

http://www.geocities.com/crx_auto/angel_eyes.htm

AcingTeam · Post by **AcingTeam** » Mon May 02, 2005 3:10 am

WooHoo wrote:go to walmart and buy a mini blind solid rod and get a blow torch and a round bowl or something.. make it round and drill the holes for the leds and your done your done

http://www.geocities.com/crx_auto/angel_eyes.htm

Yeah, I remember seeing this post... it's a lot of work to do, and knowing me, I'll probably mess something up. So I'd rather just buy a kit and install it.

daewooluvr · Post by **daewooluvr** » Mon May 02, 2005 3:15 am

Personally I don't like the Halo mod unless you have projectors.

AcingTeam · Post by **AcingTeam** » Mon May 02, 2005 11:10 am

Have a question for you guys:

Is opening the headlight just as tricky as opening a taillight (have to heat up etc)? Or does it just pop open?

Thanks

Audacity Racing · Post by **Audacity Racing** » Mon May 02, 2005 11:18 am

gotta cook it...

mocpac · Post by **mocpac** » Mon May 02, 2005 2:23 pm

correct... Put your oven at 250f (remove all bulbs anf caps of your lights first). Leave the lights in the oven for 15 min pur them in a plate not over the grills. Then they will open.. remember to remove the clips first. To close them same process.

You can buy the eye at pepboy for 11.00.. Yep amaizing....

Rusty2k finish his lights this friday also. I will try to resize the same eyes to fit my projectors, as soon they arrive.

-

Ok I have here the how to. Jorge correct me, but I thinks this how to was made by you. Is in spanish let me translate it. I will do this at my job today.