Does these fit?

[bluesheepbrian]

Well got my return back :P , spendin' some of it on an intake...
was wondering if these would fit 2002 lanos hb....

http://cgi.ebay.com/ebaymotors/ws/eBayI ... gory=38634

http://cgi.ebay.com/ebaymotors/ws/eBayI ... ename=WDVW

http://cgi.ebay.com/ebaymotors/ws/eBayI ... ename=WDVW

[AcingTeam]

Well got my return back :P , spendin' some of it on an intake...
was wondering if these would fit 2002 lanos hb....

http://cgi.ebay.com/ebaymotors/ws/eBayI ... gory=38634

http://cgi.ebay.com/ebaymotors/ws/eBayI ... ename=WDVW

http://cgi.ebay.com/ebaymotors/ws/eBayI ... ename=WDVW

Not without modifications. Look at some Hyundai Accent intakes, they are perfect fit for Lanos.

[bluesheepbrian]

Thought only modification for these is cutting of 3 inches?

[AcingTeam]

Thought only modification for these is cutting of 3 inches?

Yes.

[bluesheepbrian]

which would be a better deal these intakes or the hyundia intakes you mentioned?

[BosnianLanos]

Honda Civic Intakes are too long, Hyundai Accent Intakes are too short, meaning they don't fit directly over the hole, they fit a little short and pull in engine heat. Civic intakes, with only maybe 3-4 inches off, can fit perfectly over the hole to the fender. It's all about how you want to do it. I have a civic intake and with that lenght cut off it fits perfectly over the hole, and if I take my headlight out, I will have ram air.

Just keep in mind:

You will need to drill the intakes if you want to use the stock IAT Sensor.

You will need to expand the end of the breather hose to fit our breather outlet as it is too wide for either car, or you can just plug the breather hole on the intake, and take the breather hose off of the engine.

[AcingTeam]

I used Acura TL's intake and it fits perfectly over the hole.

[bluesheepbrian]

I used Acura TL's intake and it fits perfectly over the hole.

But how much is that compared to the civic intake? kind of have a budget.

[lanos2001]

i bought the civic intake and it was only like $35 or so from autozone. maybe a little more than ebay but you get it right then and there instead of waiting like a week unless your patient unlike me.


nick

[bluesheepbrian]

i bought the civic intake and it was only like $35 or so from autozone. maybe a little more than ebay but you get it right then and there instead of waiting like a week unless your patient unlike me.


nick

what kind was it? have an autozone nearby, kind of want right away, I am patient but kind of wanna work on as I can.

[lanos2001]

its jsut for really any 92ish civic. you can tell that it will fit. all you have to do is just saw off like three or four inches. i have pics up somewhere of my setup but i just clocked out for work so i'll post them later unless you find them.

nick

[AcingTeam]

I used Acura TL's intake and it fits perfectly over the hole.

But how much is that compared to the civic intake? kind of have a budget.

It was only like 30 bucks shipped from eBay.

[bluesheepbrian]

ok. so is one intake better than the other? or it does not matter?

[lanos2001]

well here's the pic just got home. the angle is a little off than most other people that did this mod but still works just the same.


and there should be no difference since they're both just a stright pipe.


nick

[MickeyX]

There's an intake called Weapon-R Secret Intake and they make intakes for Nubiras, Lanos, and Laganzas. Now they are kind of pricy at $186 but if you want the right fit thats the one.