I am doing a new custom CAI It will look like the firs intake of daewooluvr but I will make a heat shield. The second one is not that good IMO couse the pipe is longer so the torque suffers. When my new CAI will be instaled I'll put some pictures heremaniac16v wrote:but why dont u try a custom CAI? (cold air intake) like the one daewooluvr has u can see the picture here!
Lets See Your Engine!
Moderators: daewoomofo, Moderators Group
-
- Expert
- Posts: 3052
- Joined: Fri Mar 28, 2003 3:51 am
- Location: York, PA
- Contact:
-
- Junior
- Posts: 109
- Joined: Sat Aug 30, 2003 4:04 am
- Location: las vegas,NV
- Contact:
-
- Posts: 57
- Joined: Sat Aug 16, 2003 2:38 am
- Location: Puerto Rico
- Contact:
-
- Expert
- Posts: 3052
- Joined: Fri Mar 28, 2003 3:51 am
- Location: York, PA
- Contact:
I thinj I'll buy one too, tell me what about cleanining of that breather ??? The oil is going in to it, so prabobly you have to clean it very often ?daewooluvr wrote:That little breather cap can be bought at any auto parts store. I think I paid like $12USD for mine. It doesn't improve hp or anything but it gives you cleaner and probably colder air intake since the crankcase vent isn't going into the air intake like it was.
-
- Expert
- Posts: 3052
- Joined: Fri Mar 28, 2003 3:51 am
- Location: York, PA
- Contact:
this is when i first got my woo!!
http://www.geocities.com/woohooracing/114-1402_IMG.JPG
this is two weeks later
http://www.geocities.com/woohooracing/117-1754_IMG.JPG
and that was about 4 months ago soon you will see the best picture ever.. a turbo'd woo...
but in the mean time heres my boat
http://www.geocities.com/woohooracing/117-1761_IMG.JPG
new paint job!!
http://www.geocities.com/woohooracing/117-1774_IMG.JPG
you must copy and paste the links cause i use crapy geocities and need something better.. anyone know of something??
http://www.geocities.com/woohooracing/114-1402_IMG.JPG
this is two weeks later
http://www.geocities.com/woohooracing/117-1754_IMG.JPG
and that was about 4 months ago soon you will see the best picture ever.. a turbo'd woo...
but in the mean time heres my boat
http://www.geocities.com/woohooracing/117-1761_IMG.JPG
new paint job!!
http://www.geocities.com/woohooracing/117-1774_IMG.JPG
you must copy and paste the links cause i use crapy geocities and need something better.. anyone know of something??
for the breather thing, this would be the correct/clean/purdy way to do it, hey something greddy for a daewoo!
http://www.dsmparts.com/dsm_oil_catch_can.htm
yes it is a dsm store but catch cans are universal.
oh and a pic of my engine bay :twisted: only junk part is thats when it was stock, im still making it look purdy, will get new shots soon.
http://www.dsmparts.com/dsm_oil_catch_can.htm
yes it is a dsm store but catch cans are universal.
oh and a pic of my engine bay :twisted: only junk part is thats when it was stock, im still making it look purdy, will get new shots soon.
95 Eclipse GS-Turbo
mods: Greddy Type-S BOV, Greddy Intercooler Piping, Injen Intake, Act 2100 Clutch, Act Xact flywheel, Apexi N1 Downpipe and Catback Exhaust, MCB Set to 16 PSI, BuddyClub2 Bodykit (Not Installed) and Greddy FMIC(not installed)
mods: Greddy Type-S BOV, Greddy Intercooler Piping, Injen Intake, Act 2100 Clutch, Act Xact flywheel, Apexi N1 Downpipe and Catback Exhaust, MCB Set to 16 PSI, BuddyClub2 Bodykit (Not Installed) and Greddy FMIC(not installed)