Poly sway bar bushings?
Moderators: daewoomofo, Moderators Group
Poly sway bar bushings?
I was at pep boys the other day and saw some energy suspension poly end link bushings and swaybar bushings. they had several types and sizes they said universal just wanted to know the size I would need to do a 2000 lanos 1.6 hatchback.
"mess with the best die like the rest"
-
TheGreatAndPowerfulOz
- All Powerful
- Posts: 2767
- Joined: Thu May 01, 2003 10:37 pm
- Location: Virginia, USA
- Contact:
I'm not sure of the sizes, but I will be buying a full bushing kit from 360Dynamics for my Lanos after I get under my car and find what size from sway bar my car has.
Talk to Tom ( 360Dynamics ) about a bushing kit if you are serious about getting the right ones for your car.
Contact him here on this forum, or go to his GM-Daewoo car parts web site: http://www.360Dynamics.ca
Cliff
Talk to Tom ( 360Dynamics ) about a bushing kit if you are serious about getting the right ones for your car.
Contact him here on this forum, or go to his GM-Daewoo car parts web site: http://www.360Dynamics.ca
Cliff
Just joking.. but 75% of the is true. 
-
GsiTurbo
- Super Moderator
- Posts: 1791
- Joined: Thu Mar 13, 2003 10:56 pm
- Location: Edmonton, Alberta, Canada
- Contact:
We can supply Powerflex urethane bushings, made and imported from UK.
The pricing is:
Front wishbone, front: CAD $42.47 each
Front wishbone, rear: CAD $42.47 each
Front end requires 4 in total.
Front anti roll bar (2 required): CAD $26.49 each
Rear beam (2 required): CAD $50.45
So, the entire car would is around CAD $323.76, US approx 242.82.
This is bolt-on Lanos replacement kit.
Professional installation or well-equipped garage is recommended for the install, as in some cases the old bushings do not cooperate during the removal process.
The pricing is:
Front wishbone, front: CAD $42.47 each
Front wishbone, rear: CAD $42.47 each
Front end requires 4 in total.
Front anti roll bar (2 required): CAD $26.49 each
Rear beam (2 required): CAD $50.45
So, the entire car would is around CAD $323.76, US approx 242.82.
This is bolt-on Lanos replacement kit.
Professional installation or well-equipped garage is recommended for the install, as in some cases the old bushings do not cooperate during the removal process.
__________________________
2002 Lanos 1.5 SOHC... stock!!!
For the sway bar end links, just look under your car before going in and get something that closely matches.
The middle ones can be purchased from 360 so you know they will fit. Or you can get the universal ones for a 3/4" bar which is what I did. I also had to modify one of the mounts, but then again I only paid a $1 for the middle two bushings from a pull yard and $10 for the end link bushings.
While you are there, pick up some high temp gasket sealer to fill in the holes in your motor mounts. Two tubes will be just enough to do all three mounts. I personally only did two, the tranny side and the part where it connects under the firewall. I havn't messed with the third one because I want to trade into a new aveo.
I have some info on the install and results on my site.
Chad
www.uniquemotorsports.com
The middle ones can be purchased from 360 so you know they will fit. Or you can get the universal ones for a 3/4" bar which is what I did. I also had to modify one of the mounts, but then again I only paid a $1 for the middle two bushings from a pull yard and $10 for the end link bushings.
While you are there, pick up some high temp gasket sealer to fill in the holes in your motor mounts. Two tubes will be just enough to do all three mounts. I personally only did two, the tranny side and the part where it connects under the firewall. I havn't messed with the third one because I want to trade into a new aveo.
I have some info on the install and results on my site.
Chad
www.uniquemotorsports.com
Check out my site at www.uniquemotorsports.com