Anyone have a lower front brace?

subachad · Post by **subachad** » Thu Feb 10, 2005 5:32 pm

After filling in a motor mount, installing some polyurethane sway bar bushings and building a rear strut tower brace, I would really like to stiffen the front some more. I am not going to fill in the motormount on the passenger side because it's too much work to get out. I will fill the rear motor mount though... possibly tonight.

Has anyone built a front lower brace? I'm thinking it can connect from the control arms and go to the front with a cross brace connecting the two together. I don't want to lose any ground clearance though. Any pictures would be great.

Also, anyone know the part numbers for the front polyurethane control arm bushings?

Chad
www.uniquemotorsports.com

GsiTurbo · Post by **GsiTurbo** » Fri Feb 11, 2005 2:59 am

If thats for Lanos, I can get you lower strut brace special ordered.

I will sent info request to the supplier.

damian007vk · Post by **damian007vk** » Fri Feb 11, 2005 4:48 am

i think OMP sells one in Europe

blueoptra · Post by **blueoptra** » Fri Feb 11, 2005 4:53 am

What do u mean filled in the motor mount?

subachad · Post by **subachad** » Fri Feb 11, 2005 7:29 am

http://www.uniquemotorsports.com/daewoo ... sponse.htm

subachad · Post by **subachad** » Fri Feb 11, 2005 3:39 pm

Can anyone post up a picture of any lower front stress braces?

daewooluvr · Post by **daewooluvr** » Fri Feb 11, 2005 5:36 pm

I believe Vic found one from England. I believe it was him.
Someone linked me to one that might fit. Of course I don't have that link any longer.

The original daewootech forum

Anyone have a lower front brace?

Anyone have a lower front brace?

i think

motormounts