Nissan factory wheels on a Leganza

[chefrobert]

Has anyone tried this? Same bolt pattern 114.3

I beleive the offset is 36 and Leganza recommends 40-50

Does anyone have any insight to share

Many Thanks

Bob

[PrecisionBoost]

Daewoo Leganza.... 5 X 114.3 +45 Offset 56.6mm Hub


02-05 Nissan Altima , 89-05 Nissan Maxima, 03-05 Nissan Murano... 5 X 114.3 +45 Offset 66.1mm Hub

95-98 240SX (SE PKG)... 5 X 114.3 +40 Offset 66.1mm Hub

03-05 350Z... 5 X 114.3 +35mm Offset 66.1mm Hub

These are the only Nissans I've found that have the same bolt pattern.

Given they have 66.1mm Hubs you can use them on a Leganza but you would have to get a spacer to make up the difference.

Basicly the spacer would need to have a 56.6mm Inner Diameter and a 66.1mm Outer Diameter.

So it can be done but you would have to get a machine shop to make you up some spacers to make it work.

[PrecisionBoost]

Most of the Mitsubishi cars would fit as well but they would also need a spacer

[chefrobert]

These are actually Infinity Chrome rims 2001-2002 Factory 16 inch manufactured by nissan. I have already purchased the centering spacer adapters 56 to 66 . I should receive rims this week But somewhere I saw them listed as offset of 36. Supposedly the only effect this should have is that the wheel will be pushed out slightly to the fender. I am very anxious to receive and evaluate where I is!

[PrecisionBoost]

Oh I assumed it was a nissan car you were taking them from....

Most of the infinity vehicles have the same 5 X 114.3 pattern with a 66.1 hub center.

Only the G20, QX4, QX56 have different bolt patterns.

FX35,FX45 both have +35mm offset

I30,M45 have a +40mm offset

G35, I35, J30,Q45 have a +45 mm offset

So a set of rims from a G35 would work perfectly since the Leganza has the same +45mm offset.

[PrecisionBoost]

Which car are the rims from ???

Are these OEM rims or aftermarket rims??

I hope it's not a 36mm offset, that could be very tight.

[chefrobert]

From an i30 200o and 2001 So you suspect the offset is 40?

I hoping to put 16 225 50 or 16 215 50 on her! We will see what happens

Many thanks for your replies!

[PrecisionBoost]

You should be Ok with that combination and offset.... let us know how it turns out.

[chefrobert]

Turned out great I now run 16 inch Factory Infinity chrome rims on my leganza. Went with BF Goodrich Comp TA 215 50 16 Could have gone 225 I beleive. Handling is sooooooo much better! I am so happy!
No effect on speedometer or anything like that. About the same comfort level but performance galore over factory tires.

[PrecisionBoost]

How about some pics???

[chefrobert]

Rims are beautiful and handling is great .

[chefrobert]

http://www.cardomain.com/memberpage/773075

[AcingTeam]

they look hot!!

[scourge]

http://www.cardomain.com/memberpage/773075

Wheels look good but the I30 badge is gay and the "W" sticker keeps ther pretender to class theme going. Owner needs to lose both.