WANTED!!!! Dyno numbers

[Brian5475E]

just wanting to know if anyone with a header and exhaust, and intake work, with aliitle more fuel added has dynoed there car. Trying to figure what kinda gains I'm going to get. Right now I have a 3" CAI with a K&N, I've done my choco mod, I have the 1st muffler removed, and a aftermarket free flowing on the rear. Just wanting to guestimate how much power I'll be putting out when I put on my 4-1 header with a 2.25 exhaust

[PrecisionBoost]

Well.... I don't have an Aveo/Lanos but I could probably guess that stock you are making about 85hp at the wheels.

The CAI will probaly be good for 5 hp at the wheels

The exhaust work is probably good for another 3 hp.

The IAT "hack" (choco chip ) is probably good for 2hp

So I'm guessing that you are roughly making about 95 hp at the wheels

That's roughly 114hp at the crank.

The header and exhaust should be worth about 8 hp at the wheels bringing you up to about 103hp. ( roughly 124hp at the crank )

This is just a guess.... nobody will really know until they hit the dyno and get some real world numbers.

124hp would certainly make the car feel a whole lot faster than stock.

I'm sure that using more agressive cams and re-tuning the fuel and ignition would make for some serious power.... guessing 160hp at the crank??

[Wolf-Spirit]

once i get time im gonna test my lanos tbh never get around to it....

curently i got cai,lighter flywheel,shorter tranny,free flow exhaust,no cat... still want to remove the middle mufler and get me a 2" tube in between but cant find a pipe bending shop

i dont have a clue how much hp i got but really wanna know considering the car goes hellish fast compared to stock

[Brian5475E]

well the aveo with the 5 speed puts 90 hp to the wheels. Guy on my aveo had it dynoed. so with all that I should be around 110 at the wheels.

[Wolf-Spirit]

90wheel? not bad stock tbh?