Injectors flow rates

[MMamdouh]

anybody got the flow rates of daewoo inectors for the following engines?? i am trying to make a cross reference list for GM/BOSCH injectors so i need those flow rates in CC/min @42psi

1350CC
1500CC
1600CC
1800CC
2000CC
2200CC

MMamdouh

[C20GET]

Some injector flow rates:

Code: Select all

Displ   Flow(lbs/hr)   @press psi (kPa)  Impedance (High / Low)
2000     19                    43.5 (300)          H
2200     19                    43.5 (300)          H

Note: The same injector is used in both engines from 1999 until 2002. It is also used in many other GM vehicles in the US. You might find more specs for cars from other regions at go.delphi.com

HTH

[MMamdouh]

Some injector flow rates:

Code: Select all

Displ   Flow(lbs/hr)   @press psi (kPa)  Impedance (High / Low)
2000     19                    43.5 (300)          H
2200     19                    43.5 (300)          H

Note: The same injector is used in both engines from 1999 until 2002. It is also used in many other GM vehicles in the US. You might find more specs for cars from other regions at go.delphi.com

HTH

whats the equavlent in cc/min? can't find any conversion for lbs/hr on any tool i have

MMamdouh

[MMamdouh]

BUMP... any more data on the rest of the list?

MMamdouh

[Nubira2.2]

well for how the table is looking
all other engines should change to nubi/leggy injectors
and we (nubi/leggy guys) get bigger ones

[C20GET]

Sorry, haven't checked here in a while.

Convert lbs/hr to cc/min by multiplying lbs/hr * 10.5. 19 lb/hr is about a 200cc injector.

[MMamdouh]

anyone got the flow rates for the other engines?

MMamdouh

[MMamdouh]

anybody got the flow rates of daewoo inectors for the following engines?? i am trying to make a cross reference list for GM/BOSCH injectors so i need those flow rates in CC/min @42psi

1350CC
1500CC
1600CC
1800CC
2000CC
2200CC

MMamdouh

update:

1350CC 135cc/min
1500CC 135cc/min
1600CC 150cc/min
1800CC no idea
2000CC 200cc/min
2200CC 200cc/min

MMamdouh

[benzino]

aren't the bosch ones for the 2.0/2.2 190cc?

[MMamdouh]

well... their are two options when it comes to the 2.0 & 2.2 engines and BOSCH injectors

you can use the 0280150415 green top injectors with 190 cc/min


or use the 0280150714 yellow top injectors with 214 cc/min


out of experience the yellow top were a bit too big for the 2.0 engine... the green ones are working fine

and to add more information to this post... i have used the 0280150715 blue top injectors with 150 cc/min on the 1.5 and 1.6 engines and they are superb


MMamdouh

[benzino]

this subject interested me and I did a bit of research and found the X20XEV injectors were 220cc... do you think they'd be running higher fuel pressures? maybe

[MMamdouh]

no idea bro... sorry

MMamdouh

[benzino]

hmmm, yeah
I was looking at fuel pump info and they run lower max pressures but maybe it's in the FPR

[mr_g]

c20let has 300cc, c20xe has 220cc, etc...

[benzino]

yeah the redtop is the same as most of the other opel 2.0l