Lanos Sport exterior package?

[woodang]

Hi all its been a while.
I am trying to locate the part numbers or a oem dealer for the front and rear bumper covers, side skirts and rear spoiler on the 2001 lanos.
I have gone to all the scrap / pull your own parts yards in ohio none to be found or are in damaged condition. I like the look of the factory body kit. i suppose i could piece it altogether if there are any parts to be had.

thanks all
happy motoring
Roric

[gse_turbo]

there are several people here selling lanos sport body kits in the classified section.

[daewooluvr]

Also note that if you want the sport spoiler you're going to need to replace the rear hatch as it bolts through the glass.

[woodang]

thanks
i'll keep that in mind. i may just stay with the lower half of the vehicle. i'm still searching. went to the dealer to replace some linkage bushings or the whole thing between the firewall and tranny. well nothing in stock for any woo. body parts they gave me a website that they use for their collision center which is; www.actioncrash.com we'll see how they work I'll keep plugging. Todays project... dropping the tranny and replacing it with a newer trans. the old gear box crapped out... 1-3-5 decide to make special guest appearances and not all at the same time. 2nd and 4th are great. oh well. i just can't remember the torque specs on the wheel nut. doh!! i thinks its 125lbs but i am not positive. happy motoring....
roric

[2woo4you0]

Also note that if you want the sport spoiler you're going to need to replace the rear hatch as it bolts through the glass.

Or use BMW spoiler glue or 3M window weld. Check the post in FAQ or How-to section. I recently updated it with what I learned in my research.
On a side note, the cheapest quote I got for the sports rear glass was over $675 without labor. It may have been $850 or that was the avrg price between several places I called, not sure.

[daewooluvr]

Also note that if you want the sport spoiler you're going to need to replace the rear hatch as it bolts through the glass.

Or use BMW spoiler glue or 3M window weld. Check the post in FAQ or How-to section. I recently updated it with what I learned in my research.
On a side note, the cheapest quote I got for the sports rear glass was over $675 without labor. It may have been $850 or that was the avrg price between several places I called, not sure.

So you're saying we should cut off the bolts that woudl have normally went through the glass to bolt on and glue it on?

[2woo4you0]

Also note that if you want the sport spoiler you're going to need to replace the rear hatch as it bolts through the glass.

Or use BMW spoiler glue or 3M window weld. Check the post in FAQ or How-to section. I recently updated it with what I learned in my research.
On a side note, the cheapest quote I got for the sports rear glass was over $675 without labor. It may have been $850 or that was the avrg price between several places I called, not sure.

So you're saying we should cut off the bolts that woudl have normally went through the glass to bolt on and glue it on?

Considering if you could even find someone that could drill the glass they take the chance and the fact that the price of the rear glass with the holes is double the cost of the glass without. Yes I do.

Oh but I should add I'm fairly sure you wouldn't need to replace the hatch to bolt the spoiler. My lanos is the non-sport and it appears to have the holes needed in the hatch to bolt the spoiler. Just not the holes in the glass of course.

[AndreA]

Hi all its been a while.
I am trying to locate the part numbers or a oem dealer for the front and rear bumper covers, side skirts and rear spoiler on the 2001 lanos.
I have gone to all the scrap / pull your own parts yards in ohio none to be found or are in damaged condition. I like the look of the factory body kit. i suppose i could piece it altogether if there are any parts to be had.

thanks all
happy motoring
Roric

Hi.
I want to show you some pictures of the exterior details.
They have a good quality, the same as in the original parts.
Made of ABS plastic