Hi there,
glad you make it.
any pics of the build up? i know theres a video but pics have more detail.
Efrain
lanos full roll cage and c20get engine
Moderators: daewoomofo, Moderators Group
Re: lanos full roll cage and c20get engine
'88 Pontiac Lemans GTE - 2.0 16v XE - fully programable ECU, Custom made intake manifold and other bits.
146.6WHP/135lb.ft - 14.81@94mph
146.6WHP/135lb.ft - 14.81@94mph
- Robtek Racing
- Posts: 10
- Joined: Mon Aug 23, 2010 2:37 am
- Location: Montreal
Re: lanos full roll cage and c20get engine
i have a few photos -- about a thousand, give or take.
But the video is a collection of the best pictures: you just have to click "pause" to see the details.
If there's anything specific you'd like to see more closely, please let me know and I'll be happy to share more photos
But the video is a collection of the best pictures: you just have to click "pause" to see the details.
If there's anything specific you'd like to see more closely, please let me know and I'll be happy to share more photos
One Lanos for racing. One Lanos to get to work. One Lanos for parts. I just need one more... just in case.
- Robtek Racing
- Posts: 10
- Joined: Mon Aug 23, 2010 2:37 am
- Location: Montreal
Re: lanos full roll cage and c20get engine
I tell you my engine was an C20LZ but i'm not sure now...
the number on the block is not visible, but the engine is a 2 liters and have 9.2/1 compression ratio, with multi port fuel injection...
the number on the block is not visible, but the engine is a 2 liters and have 9.2/1 compression ratio, with multi port fuel injection...
One Lanos for racing. One Lanos to get to work. One Lanos for parts. I just need one more... just in case.
- Robtek Racing
- Posts: 10
- Joined: Mon Aug 23, 2010 2:37 am
- Location: Montreal
Re: lanos full roll cage and c20get engine
After a closer look, it look more like an C20NE but i'm not sure...
One Lanos for racing. One Lanos to get to work. One Lanos for parts. I just need one more... just in case.
Re: lanos full roll cage and c20get engine
if you got some time you should write a thred on the build up (with pics ) and specs here
Re: lanos full roll cage and c20get engine
its an orginal 8v turbo?
if so then its a c20get,
the lz was TBI. and i think it was 8,8 comp
you should make a buildup thread in the performance forum.
Efrain
if so then its a c20get,
the lz was TBI. and i think it was 8,8 comp
you should make a buildup thread in the performance forum.
Efrain
'88 Pontiac Lemans GTE - 2.0 16v XE - fully programable ECU, Custom made intake manifold and other bits.
146.6WHP/135lb.ft - 14.81@94mph
146.6WHP/135lb.ft - 14.81@94mph
- Robtek Racing
- Posts: 10
- Joined: Mon Aug 23, 2010 2:37 am
- Location: Montreal
Re: lanos full roll cage and c20get engine
NOW i know !!!
The Lanos will be very competitive...
I made the 3rd best lap time this week end with my new springs set-up, i cut 6/10 of a second of my personal best lap, and now i just need to keep all the 4 wheels straight on the car (oh did i mention i hit the wall this weekend? ) but i have all the alignement data sheet (before the wall) and i will repair the car this week...
i made a 20.199 seconds lap and the best lap this weekend was 20.100sec
The track record in my class is 19.976sec..
It's only the begining, i have a lot more ajustements to experiment
Remember, my engine is straight from the scrapyard
The Lanos will be very competitive...
I made the 3rd best lap time this week end with my new springs set-up, i cut 6/10 of a second of my personal best lap, and now i just need to keep all the 4 wheels straight on the car (oh did i mention i hit the wall this weekend? ) but i have all the alignement data sheet (before the wall) and i will repair the car this week...
i made a 20.199 seconds lap and the best lap this weekend was 20.100sec
The track record in my class is 19.976sec..
It's only the begining, i have a lot more ajustements to experiment
Remember, my engine is straight from the scrapyard
One Lanos for racing. One Lanos to get to work. One Lanos for parts. I just need one more... just in case.
- PrecisionBoost
- Super Moderator
- Posts: 4437
- Joined: Thu Jun 19, 2003 5:59 am
- Location: Edmonton, Alberta, Canada
Re: lanos full roll cage and c20get engine
I think there is some confusion, the C20GET was the 8V turbo he pulled out, the C20LZ came as TBI in the older Sunbirds but then they installed multi-port injection in the newer Sunbirds ( believe the multi-port version was 92-94 )Robtek Racing wrote: I switched out the c20get for a 94 Pontiac Sunbird engine, to meet Nascar's Sport-Compacte Regulation.
To my knowledge we did not receive the C20NE over here in Canada.
2010 BMW 335D
1994 Opel Calibra 4X4 turbo ( C20LET 2.0L Turbo )
2002 Daewoo lanos
1994 Opel Calibra 4X4 turbo ( C20LET 2.0L Turbo )
2002 Daewoo lanos