exhaust. . . again

kinkyllama · Post by **kinkyllama** » Mon Oct 25, 2004 9:24 pm

Anyone happen to know what size the stock exhaust is on the suki forenza? I cant find anything to measure it.
thanks in advanced

richardmatalon · Post by **richardmatalon** » Fri Oct 29, 2004 3:49 am

probably between an inch and three quater or at most two inches, It would more than likely be an inch and three quater an inch and a half. Why do you ask, do you want to add a performance muffler without changing the pipe? If so, you can always use the same pipe and they (the muffler people) can weld in an adapter to go up from 1 1/2 " to 2"

kinkyllama · Post by **kinkyllama** » Fri Oct 29, 2004 1:16 pm

I have someone whos going to add a straight pipe where the resister is and a 2 1/4 muffler at the end

kinkyllama · Post by **kinkyllama** » Sun Oct 31, 2004 10:57 pm

richardmatalon wrote:probably between an inch and three quater or at most two inches, It would more than likely be an inch and three quater an inch and a half. Why do you ask, do you want to add a performance muffler without changing the pipe? If so, you can always use the same pipe and they (the muffler people) can weld in an adapter to go up from 1 1/2 " to 2"

Where could i buy an adapter like this? just a hardware store? what material would be best? thanks

DomWoo · Post by **DomWoo** » Mon Nov 01, 2004 12:54 am

just go to checker auto parts store they got all the sizes you need

AcingTeam · Post by **AcingTeam** » Mon Nov 01, 2004 3:19 am

You do not need to worry about anything. Bring your car to the shop and your new muffler, they will weld it on by any means possible. Do not need to worry about any adapters or anything, let them do it, it's their job.

kinkyllama · Post by **kinkyllama** » Mon Nov 01, 2004 4:32 am

AcingTeam wrote:You do not need to worry about anything. Bring your car to the shop and your new muffler, they will weld it on by any means possible. Do not need to worry about any adapters or anything, let them do it, it's their job.

Im not having a shop do it. My parents friend is a welder

richardmatalon · Post by **richardmatalon** » Mon Nov 01, 2004 4:53 am

you need to know what size the stock pipe is and then go to like adiscount auto or pepboys or something and tehy have muffler pipe there and adapters

kinkyllama · Post by **kinkyllama** » Mon Nov 01, 2004 5:00 am

i figured. . . but i dont have the time to go check it out if they dont.

thanks guys