Idle learn procedure

[buddha102]

Do i need a software update for my ECU from dealer? (lanos)

There is a known fault on some Lanos that cause high idle and need an ECU software update. If you don't fancy paying Daewoo there is a temporary fix by:

[Big Jeff]

Do i need a software update for my ECU from dealer? (lanos)

There is a known fault on some Lanos that cause high idle and need an ECU software update. If you don't fancy paying Daewoo there is a temporary fix by:

my car idle high for a bit but than i juest disconnect the battery for 10 min and drian the system of power, just to reset the ecu... i haven't had a problem since...

[buddha102]

what about when u leave ur car outside, lets say for 2 hrs (weather is hot), then u start up the car and it idles high... do u get that? most of the time i get that which is fucking annoying me

[daewoomofo]

my car always idles very high until it gets hot, but when the temp gets warm it idles normal

[buddha102]

thats the thing with my car, when at normal operation temp: it idles about 700-800 rpm

when i start the car up i have to wait like 5 minutes, cause at start up my rpm is at 1100-1000. So when i wait 5 min, it drops to 900-800 then i can drive, because when i drive after start up and put it in gear D4 (auto tranny), it raises up to 1300 rpm for some reason, but when it reaches the normal temp, it drops to 800 rpm.

weird ass car lol

i know that on my mom's subaru, when u put it in gear after start up, the rpm drops, and over here is other way around

rofl

jeff, did u do idle learn procedure after u put plug in the batt?

[Big Jeff]

thats the thing with my car, when at normal operation temp: it idles about 700-800 rpm

when i start the car up i have to wait like 5 minutes, cause at start up my rpm is at 1100-1000. So when i wait 5 min, it drops to 900-800 then i can drive, because when i drive after start up and put it in gear D4 (auto tranny), it raises up to 1300 rpm for some reason, but when it reaches the normal temp, it drops to 800 rpm.

weird ass car lol

i know that on my mom's subaru, when u put it in gear after start up, the rpm drops, and over here is other way around

rofl

jeff, did u do idle learn procedure after u put plug in the batt?

you fool

almost every car idles like that when you start it up if the engine is not at normal temp......even mine

it does it to get to normal temp, and you can drive it to with out have to wait

now if it was idling at 1500+ rpm then is a problem

[daewoomofo]

thats pretty much what my car dos also. thats why i ALWAYS remote start it adn let it warm up. even in the heat of the sumer