Daewoo Sens(Lanos) 3,0T from Ukraine

Forced induction, NA tunning, exhaust, just performance

Moderators: daewoomofo, Moderators Group

User avatar
GsiTurbo
Super Moderator
Posts: 1791
Joined: Thu Mar 13, 2003 10:56 pm
Location: Edmonton, Alberta, Canada
Contact:

Re: Daewoo Sens(Lanos) 3,0T from Ukraine

Post by GsiTurbo »

ms156 => piszy po angielskim jazyku pazalsta. Eto angielskij forum. Spasiba.
Image
__________________________
2002 Lanos 1.5 SOHC... stock!!!
Salo&Fish
Posts: 4
Joined: Wed Mar 11, 2009 9:37 am
Contact:

Post by Salo&Fish »

my car!
Attachments
index2.jpeg
(67.23 KiB) Downloaded 1039 times
index.jpeg
my car!
(56.21 KiB) Downloaded 1047 times
Last edited by Salo&Fish on Wed Mar 25, 2009 8:17 am, edited 1 time in total.
User avatar
ms156
Posts: 6
Joined: Tue Mar 10, 2009 1:11 pm
Location: Ukraine, Kiev
Contact:

Re: Daewoo Sens(Lanos) 3,0T from Ukraine

Post by ms156 »

What is it? :oops:
Salo&Fish
Posts: 4
Joined: Wed Mar 11, 2009 9:37 am
Contact:

Re: Daewoo Sens(Lanos) 3,0T from Ukraine

Post by Salo&Fish »

it is a space cutter!
OLEGator
Posts: 18
Joined: Mon Mar 02, 2009 8:38 pm

Re: Daewoo Sens(Lanos) 3,0T from Ukraine

Post by OLEGator »

Panjaby-car :))))
PS S&F, it's no your car ;)
User avatar
ms156
Posts: 6
Joined: Tue Mar 10, 2009 1:11 pm
Location: Ukraine, Kiev
Contact:

Re: Daewoo Sens(Lanos) 3,0T from Ukraine

Post by ms156 »

it is my green dragon!
Attachments
20 LET .JPG
(89.6 KiB) Downloaded 1040 times
1.JPG
(77.78 KiB) Downloaded 1038 times
Salo&Fish
Posts: 4
Joined: Wed Mar 11, 2009 9:37 am
Contact:

Re: Daewoo Sens(Lanos) 3,0T from Ukraine

Post by Salo&Fish »

I said that it is a not car space cutter! that for doubting! why not my?
OLEGator
Posts: 18
Joined: Mon Mar 02, 2009 8:38 pm

Re: Daewoo Sens(Lanos) 3,0T from Ukraine

Post by OLEGator »

Hello! Little update.
Yesterday i run my woo under 0,8 boost. Gas - 95 unlead (Shell vPower), AFR - 11,8-12 (under boost), Tyres Toyo R888.

I drive from 4th gear (4-5-6), on 3rd gear even R888 can't drive stability. For correct understanding AVC-R have +7% in

speedo (by AVC-R - 215 km\h, but real - 200). Common i run to real 220 km\h. Ithink, that after little time i run Daewoo

Sens (Lanos) to 300 km\h ;) .

2nd - is acceleration on 6th gear (3,0 is 3,0 ;) ).

http://www.youtube.com/watch?v=0Y4M5GumC7o

http://www.youtube.com/watch?v=i1pnV4KVut0

PS Thanks to my brave wife for helping :oops:
Mister.x
Posts: 5
Joined: Thu Mar 26, 2009 10:52 am

Re: Daewoo Sens(Lanos) 3,0T from Ukraine

Post by Mister.x »

Oh yeah Mister,it's very nice...Can you make some others videos please. :smt067
Good job,i'll build my astra gsi mv6 with one turbo or bi-turbos soon when i'm time. :smt109
exist3nce
Expert
Posts: 1233
Joined: Mon Oct 25, 2004 2:24 am
Location: Toronto, Canada

Re: Daewoo Sens(Lanos) 3,0T from Ukraine

Post by exist3nce »

that is very fast acceleration, i love it! :D
2004 Optra/Forenza/Lacetti - 225whp - Haltech Sprint500 - CT12B - Getrag F28 6spd - KW V3 Coilovers - FX35 Retrofit
2002 IS300 5MT - 615whp - AEM EMS - GT4088R - Built 9.5CR - R154 - TRD LSD - SupraTT T/B - Varex - LS430 Retrofit
OLEGator
Posts: 18
Joined: Mon Mar 02, 2009 8:38 pm

Re: Daewoo Sens(Lanos) 3,0T from Ukraine

Post by OLEGator »

2 Mister x, i see your projekt on mv6.de ;) Nice! I think, that singl turbo based (GT30-37) give beter result than the bi. We have big volume and this meen, that we have no prblem on low rpm, usual city daily i drive on 1200-2000 rpm and feel excelent. Many Opel V6 turbo in Europe used MS to menage, but in UA, nobody used and know it (for 4-cyl usualy used "Yanvar'" - very advanced and known motor menagement from Russia which based on early Bosch Motronic but much modify) and i have many problem before tuning comletly fuel and ignition system (don't fun, i use Motronic 2.8.1 :D ).
Mister.x
Posts: 5
Joined: Thu Mar 26, 2009 10:52 am

Re: Daewoo Sens(Lanos) 3,0T from Ukraine

Post by Mister.x »

Ok Mister cool, do you use oiljet for rods into the engine-block or what pistons and rods do you use ?
OLEGator
Posts: 18
Joined: Mon Mar 02, 2009 8:38 pm

Re: Daewoo Sens(Lanos) 3,0T from Ukraine

Post by OLEGator »

Mister X, you may fun, but i use stock rods, bolts and pistons. I reduce comression by metal gasket (common - 3 mm), but it give one truble. Couse motor V, heads get away in different side. But now is Ok. Beter, of course, - use JE or CP pistons, Carillo rods, but it cost :shock:
Mister.x
Posts: 5
Joined: Thu Mar 26, 2009 10:52 am

Re: Daewoo Sens(Lanos) 3,0T from Ukraine

Post by Mister.x »

@ Olegator, can i put 2x head gaskets + an iron plate or only 2x head gaskets only by head cylinder or only the iron plate by head cylinder.Can you show me how you build your mods for iron gasket.
This is pics of the iron plate:
Image
OLEGator
Posts: 18
Joined: Mon Mar 02, 2009 8:38 pm

Re: Daewoo Sens(Lanos) 3,0T from Ukraine

Post by OLEGator »

Mr.x. I'm sorry, i loose many time. Russian's said "beter after then never".
Yes, i make "sandvich" - standart gasket, aluminium cast gasket and one more standart. Stdt+al. gasket=3mm. But it work if boost low than 1 bar. In my new motor i want use "pyramid rings" with special custom gasket (make from standart).
Locked