thinking of throwing a turbo on the woo

Forced induction, NA tunning, exhaust, just performance

Moderators: daewoomofo, Moderators Group

sheepdizildawg
Expert
Posts: 342
Joined: Wed May 07, 2008 4:42 am
Location: Washington, USA

thinking of throwing a turbo on the woo

Post by sheepdizildawg »

well in about 4 months i will be out of school and able to get a good paying job finally. I will be buying a new car, but keeping the lanos as a project car. i am thinking the first thing i will be doing is putting a turbo in it. I know there is a few build lists around here, but i think i have most parts down.

I need the turbo, a small one, not looking for a lot of boost
so:
turbo
intercooler
intercooler piping
oil lines
boost gauge
manifold
injectors
injector rails
fuel pump
a new ecm or piggy back


ok so i know where to get most of this stuff

quick questions

injectors.. where to get them? and what size?
what fuel pump should i go with?
and where to get a piggy back system or what ecu should i use?
User avatar
RSZT4
Junior
Posts: 152
Joined: Sun Jan 25, 2009 3:48 am
Location: Ontario, Canada

Post by RSZT4 »

the injectors will be based on what size turbo you are going with and how much boost you want.... so a lil more info is needed
exist3nce
Expert
Posts: 1233
Joined: Mon Oct 25, 2004 2:24 am
Location: Toronto, Canada

Post by exist3nce »

Stock fuel pump might also be fine for a low boost conservative setup
2004 Optra/Forenza/Lacetti - 225whp - Haltech Sprint500 - CT12B - Getrag F28 6spd - KW V3 Coilovers - FX35 Retrofit
2002 IS300 5MT - 615whp - AEM EMS - GT4088R - Built 9.5CR - R154 - TRD LSD - SupraTT T/B - Varex - LS430 Retrofit
sheepdizildawg
Expert
Posts: 342
Joined: Wed May 07, 2008 4:42 am
Location: Washington, USA

Post by sheepdizildawg »

no more then 8psi. not looking for something huge just enough to get an edge on the competition.
User avatar
PrecisionBoost
Super Moderator
Posts: 4437
Joined: Thu Jun 19, 2003 5:59 am
Location: Edmonton, Alberta, Canada

Post by PrecisionBoost »

When you say your from Washington..... are we talking the NW state.... or Washington the capital?

If your from the state of Washington then I would suggest the idea of driving up to Alberta and we can help you.

Do you have emission testing in Washington?

That is always something you have to consider
2010 BMW 335D
1994 Opel Calibra 4X4 turbo ( C20LET 2.0L Turbo )
2002 Daewoo lanos
sheepdizildawg
Expert
Posts: 342
Joined: Wed May 07, 2008 4:42 am
Location: Washington, USA

Post by sheepdizildawg »

yes washington like right underneath you. NW. yes we have immisions. wonderful thing about that though is i just passed it back in august. so i have four years without needing it again. thank god. haha.
sheepdizildawg
Expert
Posts: 342
Joined: Wed May 07, 2008 4:42 am
Location: Washington, USA

Post by sheepdizildawg »

and a trip like that is a long one from where i am at. google says 14 hours one way.
MMamdouh
Moderator
Posts: 7299
Joined: Wed Feb 18, 2004 8:33 am
Location: Cairo, Egypt
Contact:

Post by MMamdouh »

you don't need a turbo manifold... can use the OEM mani with adapter flange

you use the injectors from a 2.0 or 2.2 nubira or leganza (given the 8 PSI boost you are going to be running)

also you can keep your OEM fuel rail

MMamdouh
Driving is the utmost fun you can have with your pants on!
Check out my ride: http://www.cardomain.com/ride/567267
Image
sheepdizildawg
Expert
Posts: 342
Joined: Wed May 07, 2008 4:42 am
Location: Washington, USA

Post by sheepdizildawg »

sweet, will the stock fuel pump work? or do i need a new one? and where do i find a piggy back for my ecm?

any thoughts on a turbo to use? something that spools up quickly?
MMamdouh
Moderator
Posts: 7299
Joined: Wed Feb 18, 2004 8:33 am
Location: Cairo, Egypt
Contact:

Post by MMamdouh »

we have a turbo 2.0 optra running 237 WHP with stock fuel pump... i recon you got nothing to worry about in this area

MMamdouh
Driving is the utmost fun you can have with your pants on!
Check out my ride: http://www.cardomain.com/ride/567267
Image
sheepdizildawg
Expert
Posts: 342
Joined: Wed May 07, 2008 4:42 am
Location: Washington, USA

Post by sheepdizildawg »

sweet so narrow down the list

turbo
intercooler
intercooler piping
oil lines
boost gauge
manifold
injectors
injector rails
fuel pump
stuff in bold is stuff i dont need
a new ecm or piggy back
adapter plate
injectors for 2.2 engine
[/b]
sheepdizildawg
Expert
Posts: 342
Joined: Wed May 07, 2008 4:42 am
Location: Washington, USA

Post by sheepdizildawg »

so i found this guy selling a turbo kit for an eclipse.
he wants $800 for everything.

i was thinking buy it, then sell the injectors, fuel pump, manifold, pillar pods, and there was a few other things, think this would be a good idea?
just use the turbo and intercooler and maybe some of the lines and the gauges,
sheepdizildawg
Expert
Posts: 342
Joined: Wed May 07, 2008 4:42 am
Location: Washington, USA

Post by sheepdizildawg »

or does anyone know of a car that might be close to the woo?
User avatar
jidasas
Expert
Posts: 640
Joined: Sun Nov 20, 2005 8:36 pm
Contact:

Post by jidasas »

I got my turbo and intercooler for 200...EBAY

Jimmy
Image
User avatar
RSZT4
Junior
Posts: 152
Joined: Sun Jan 25, 2009 3:48 am
Location: Ontario, Canada

Post by RSZT4 »

jidasas wrote:I got my turbo and intercooler for 200...EBAY

Jimmy
Ebay turbos are hit and miss i've saw some blow apart at 7psi of boost and ive saw other where they went to 12 np..... You're better off finding a T3 or T3/T4 hybrid and getting a IC off E bay.
Locked