greenbluewoo turbo build ''list''

Forced induction, NA tunning, exhaust, just performance

Moderators: daewoomofo, Moderators Group

Locked
User avatar
greenbluewoo
Expert
Posts: 375
Joined: Thu Sep 23, 2004 7:44 pm
Location: New Hampshire
Contact:

Post by greenbluewoo »

does anyone know where I can get my dash flocked or if they make a dash flocking kit because flocked dashes looks awesome
2.0 engine swap in the works
User avatar
greenbluewoo
Expert
Posts: 375
Joined: Thu Sep 23, 2004 7:44 pm
Location: New Hampshire
Contact:

Post by greenbluewoo »

well today I got my high performance cams from gse turbo and they look very nice Image Image comparison stock on the left high perf on the right Image Image
2.0 engine swap in the works
gse_turbo
DTM Daewoo Mod
Posts: 2394
Joined: Fri Jun 23, 2006 4:20 am
Location: Englewood, Colorado United States
Contact:

Post by gse_turbo »

:? the surface rust on the cam is a bit unsettling! was the box damaged? ...figures, the one I don't inspect ends up with surface rust :oops:
Image
Pir0
Expert
Posts: 1256
Joined: Tue Nov 27, 2007 9:25 pm
Location: Ireland

Post by Pir0 »

That's the old, original cam ya eejit!

It's a comparison picture :P


Those cames looks pretty nice, you can actually see the difference in the lobe sizes when they're side by side like that.
SAZ
---------------------
Image
gse_turbo
DTM Daewoo Mod
Posts: 2394
Joined: Fri Jun 23, 2006 4:20 am
Location: Englewood, Colorado United States
Contact:

Post by gse_turbo »

:lol: :lol: :lol: that's about the best laugh I've had in a while! thanks for pointing that out Paul :lol:
Pir0
Expert
Posts: 1256
Joined: Tue Nov 27, 2007 9:25 pm
Location: Ireland

Post by Pir0 »

Quick edit your post before he reads the bit where you said you didnt check it! :lol: :lol: :lol:

j/k
SAZ
---------------------
Image
User avatar
greenbluewoo
Expert
Posts: 375
Joined: Thu Sep 23, 2004 7:44 pm
Location: New Hampshire
Contact:

Post by greenbluewoo »

the surface rust on the cam is a bit unsettling!
I thought the same thing when I took the valve cover off but that was the only spot
2.0 engine swap in the works
kinkyllama
Expert
Posts: 3772
Joined: Wed Oct 20, 2004 4:47 am
Location: USA, Arizona
Contact:

Post by kinkyllama »

Is there any advantage with the Z20LET fuel rail?


Also is the boss quick release a direct bolt on?
www.KinkyMotorsports.com
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
User avatar
greenbluewoo
Expert
Posts: 375
Joined: Thu Sep 23, 2004 7:44 pm
Location: New Hampshire
Contact:

Post by greenbluewoo »

the boss kit is direct bolt on and then i got a slim quick release and it bolts on to the hub and steering wheel bolts on to the quick release and yes the z20let fuel rail has a advantage than u20sed rail for one its twice the size and in a lanos it has a return fuel system u20sed rail is returnless and the z20let rail you can hook up an aftermarket fuel pressure regulator and you cant with the u20sed rail
2.0 engine swap in the works
User avatar
greenbluewoo
Expert
Posts: 375
Joined: Thu Sep 23, 2004 7:44 pm
Location: New Hampshire
Contact:

Post by greenbluewoo »

oh yeah and the z20let rail came with 440cc injectors
2.0 engine swap in the works
kinkyllama
Expert
Posts: 3772
Joined: Wed Oct 20, 2004 4:47 am
Location: USA, Arizona
Contact:

Post by kinkyllama »

greenbluewoo wrote:oh yeah and the z20let rail came with 440cc injectors
Stock?

Do you have a part number for the boss stuff?
www.KinkyMotorsports.com
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
User avatar
greenbluewoo
Expert
Posts: 375
Joined: Thu Sep 23, 2004 7:44 pm
Location: New Hampshire
Contact:

Post by greenbluewoo »

the injectors are a upgrade for the z20let and heres the link where I got them http://cgi.ebay.co.uk/VAUXHALL-OPEL-VXR ... .m14.l1318 heres where I got my boss kit http://cgi.ebay.co.uk/Vauxhall-Astra-Ti ... 0058155305
2.0 engine swap in the works
User avatar
greenbluewoo
Expert
Posts: 375
Joined: Thu Sep 23, 2004 7:44 pm
Location: New Hampshire
Contact:

Post by greenbluewoo »

I think its time for a little update got some new parts in ;) adjustble cam gear, obx catch can, obx heatshield and filter Image Image equaul length driveshaft from a calibra Image kdm headlights from kinkylama pics dont do it justice looks way better in person Image Image then trial fitted some parts to see how it would lookImage Image got around to take off the rear beam and take off all of the rust and painted chassi black and did the rear disc conversion I'm very pleased how it came out I just have to buy some bolts so I can put on the calipers and have to get the brake cable and brake pads Image Image
2.0 engine swap in the works
User avatar
greenbluewoo
Expert
Posts: 375
Joined: Thu Sep 23, 2004 7:44 pm
Location: New Hampshire
Contact:

Post by greenbluewoo »

interior pic ;) Image
2.0 engine swap in the works
gse_turbo
DTM Daewoo Mod
Posts: 2394
Joined: Fri Jun 23, 2006 4:20 am
Location: Englewood, Colorado United States
Contact:

Post by gse_turbo »

VERY AWESOME! this is going to be one of the best builds to date!

...whats the plan for the header?
Image
Locked