The daewoo

Pir0 · Post by **Pir0** » Mon Nov 10, 2008 9:05 am

Isnt that illegal to have the fronts done that much? I know my rear ones are probably illegal, but I have 2 sets. one for MOT and 1 for me

daewoomofo · Post by **daewoomofo** » Mon Nov 10, 2008 10:58 am

there you go!

fronts look nice, but yeah id go darker on the back. what paint did you use?

sheepdizildawg · Post by **sheepdizildawg** » Mon Nov 10, 2008 3:14 pm

lol thanks. i was late for work so didnt have time to fix the picture code. yeah I will be going darker in the rear. i will be sanding most of the front off today due to last night not being able to see anything coming home from work at midnight. went a little to dark. dimmed my lights a lot. I used VHT nightshade, store down the road from me carries it. you can get it off ebay for not that much money.

daewoomofo · Post by **daewoomofo** » Mon Nov 10, 2008 9:54 pm

thanks!

benzino · Post by **benzino** » Tue Nov 11, 2008 5:22 am

seeing that you have the bonnet pins, why don't you cut out the centre latch part in the grille?

daewoomofo · Post by **daewoomofo** » Tue Nov 11, 2008 10:50 am

benzino wrote:seeing that you have the bonnet pins, why don't you cut out the centre latch part in the grille?

+1

sheepdizildawg · Post by **sheepdizildawg** » Wed Nov 19, 2008 12:41 am

i took the second latch out of the hood so you pull the pins then pull the latch and it comes up... i dont want to take the chance of something failing. i might cut it off later.

ok so i know i have asked this before, but i am looking to do a body kit on my car, what would be the best set up? i can get a front bumper from a hatch kit, but what kind of side skirts and rear bumper would be best with the least modding done to it?

sheepdizildawg · Post by **sheepdizildawg** » Wed Nov 19, 2008 8:21 am

pieced together a whole body kit for the lanos, front, sides, rear, and spoiler for a little less then $500 before shipping. i emailed to see what shipping would cost me.

sheepdizildawg · Post by **sheepdizildawg** » Mon Nov 24, 2008 8:52 pm

well guys, i bought a 7 inch touch screen and it should be here in 2 days (wednesday). I redid my laptop and i will be using that as my carputer as of right now. i will be fiberglassing in the screen where the stereo is in the dash, and i will be moving the dash down to about where the cup holders are, i am deleting the cup holders due to me not wanting drinks by the touch screen. will post pictures as it comes along

sheepdizildawg · Post by **sheepdizildawg** » Tue Dec 02, 2008 8:32 am

got it the other day, the laptop i have doesnt work with it, so i have to build a carputer. oh well. its a 7" touch screen and i molded it to fit where the stereo usually is. here is a vid. i will be redoing the paint next week sometime.

http://s33.photobucket.com/albums/d93/t ... nstall.flv

sound sucks because my car was on and my door was open. oh well lol

daewoomofo · Post by **daewoomofo** » Tue Dec 02, 2008 10:44 am

looks good. why wouldnt your laptop work? its just like any other computer.

benzino · Post by **benzino** » Tue Dec 02, 2008 11:59 am

HAHa Thats awesome

sheepdizildawg · Post by **sheepdizildawg** » Tue Dec 02, 2008 3:00 pm

no, VGA ports on computers put out two different currents. some put out 3.3 volts and some put out 5 volts. well my laptop has to me one of the select few that only puts out 3.3 volts. not a problem with other monitors, but for this touch screen to see that a monitor is plugged in, it needs 5 volts, otherwise the screen just goes to sleep. i have some plans from online that shows you how to make an amplifier. if only i knew how to do a little more electronics. lol

daewoomofo · Post by **daewoomofo** » Tue Dec 02, 2008 11:00 pm

ahhh that makes sence

Rodd1s · Post by **Rodd1s** » Wed Dec 03, 2008 2:29 pm

what about using a small dc-dc converter?

The original daewootech forum

The daewoo

new touch screen