auto to manual conversion
Moderators: daewoomofo, Moderators Group
-
- Expert
- Posts: 3052
- Joined: Fri Mar 28, 2003 3:51 am
- Location: York, PA
- Contact:
auto to manual conversion
Hey all,
I have a 2000 Lanos auto that I'd like to swap out to the D16 transmisison.
Does anyone know if the trans mounts are the same for the auto and manual transmisisons?
Will the manual transmission bolt right up to the engine?
Will the auto drive shafts work with the manual trans?
Here's what I think I need so far:
D16 Trans
Possibly Trans mounts
Shifter Assembly
Pedal Assembly
Is the pedal assembly cable driven or hydrolic?
Any help is greatly appreciated.
I have a 2000 Lanos auto that I'd like to swap out to the D16 transmisison.
Does anyone know if the trans mounts are the same for the auto and manual transmisisons?
Will the manual transmission bolt right up to the engine?
Will the auto drive shafts work with the manual trans?
Here's what I think I need so far:
D16 Trans
Possibly Trans mounts
Shifter Assembly
Pedal Assembly
Is the pedal assembly cable driven or hydrolic?
Any help is greatly appreciated.
-
- DTM Daewoo Mod
- Posts: 2394
- Joined: Fri Jun 23, 2006 4:20 am
- Location: Englewood, Colorado United States
- Contact:
I'm pretty sure the mount are the same but the bracket is different, just the one over the gearbox. the one to the right side up against the firewall is the same.
the bolt pattern to the engine is the same.
I'm pretty sure you will need the driveshafts as well.
along with the list you have there you might need the concole as well, can't say for sure.
the bolt pattern to the engine is the same.
I'm pretty sure you will need the driveshafts as well.
along with the list you have there you might need the concole as well, can't say for sure.
-
- Expert
- Posts: 3052
- Joined: Fri Mar 28, 2003 3:51 am
- Location: York, PA
- Contact:
What do you mean by the bracket over the gearbox?gse_turbo wrote:I'm pretty sure the mount are the same but the bracket is different, just the one over the gearbox. the one to the right side up against the firewall is the same.
the bolt pattern to the engine is the same.
I'm pretty sure you will need the driveshafts as well.
along with the list you have there you might need the concole as well, can't say for sure.
Also if the D16 uses a hydrolic system then I guess I'll need all those parts too:
Clutch Slave Cylinder
Clutch Master Cylinder
all the lines, ... ect.
ugh. I wonder if it'd be easier to pick up a manual lanos and just swap the two... that way I have everything in the other one...
-
- DTM Daewoo Mod
- Posts: 2394
- Joined: Fri Jun 23, 2006 4:20 am
- Location: Englewood, Colorado United States
- Contact:
actually I don't think it's over the transmission now that I think (that's just the nubira, forenza...) there is a rubber motor mount that mounts to the chassis and from there, there is a bracket between it and the gearbox, that is what would have to replaced. ...I think!
it is hydraulic but you can go one of two ways. you can use the setup from the lanos or the mechanical system from the lemans.
if you could find one it would be easier to buy a 5 speed lanos.
it is hydraulic but you can go one of two ways. you can use the setup from the lanos or the mechanical system from the lemans.
if you could find one it would be easier to buy a 5 speed lanos.
-
- Expert
- Posts: 3052
- Joined: Fri Mar 28, 2003 3:51 am
- Location: York, PA
- Contact:
I'm going to begin looking for cheap 5 speed lanos'gse_turbo wrote:actually I don't think it's over the transmission now that I think (that's just the nubira, forenza...) there is a rubber motor mount that mounts to the chassis and from there, there is a bracket between it and the gearbox, that is what would have to replaced. ...I think!
it is hydraulic but you can go one of two ways. you can use the setup from the lanos or the mechanical system from the lemans.
if you could find one it would be easier to buy a 5 speed lanos.
How do you know which ones have the close ratio gearbox? is it only the sports?
-
- Moderator
- Posts: 4795
- Joined: Fri Nov 18, 2005 1:41 am
- Location: 313
-
- Moderator
- Posts: 4795
- Joined: Fri Nov 18, 2005 1:41 am
- Location: 313
-
- Expert
- Posts: 3052
- Joined: Fri Mar 28, 2003 3:51 am
- Location: York, PA
- Contact:
I have an auto in my current lanos. I'd like a 5sp and if I get another Lanos I'd have everything I need without worrying about what parts I am missing to do the swap.jidasas wrote:Off topic but why are you looking for another lanos?
Jimmy
I could then possibly swap the auto into the other lanos and sell it.
-
- Moderator
- Posts: 4795
- Joined: Fri Nov 18, 2005 1:41 am
- Location: 313
i know kinkyllama is selling a lanos sport 5 speed tranny, its not the whole car, but it is the close ratio you want
http://www.daewootech.com/forum/viewtopic.php?t=10290
http://www.daewootech.com/forum/viewtopic.php?t=10290
-
- Expert
- Posts: 3052
- Joined: Fri Mar 28, 2003 3:51 am
- Location: York, PA
- Contact:
I know, I've been talking to him about it but it wouldn't include everything I need and by the time I buy it and pay for the shipping I can probably get a wrecked Lanos for.daewoomofo wrote:i know kinkyllama is selling a lanos sport 5 speed tranny, its not the whole car, but it is the close ratio you want
http://www.daewootech.com/forum/viewtopic.php?t=10290
Things are still up in the air.
why we convert
hi there
i have lanos 99 auto trans
it works will, but in case that i have trouble with the auto trans i'll think to convert to manual ,
so I'd like to know exactly , can I convert without problems our bad result ?
and what I need to convert and how it much??
i have lanos 99 auto trans
it works will, but in case that i have trouble with the auto trans i'll think to convert to manual ,
so I'd like to know exactly , can I convert without problems our bad result ?
and what I need to convert and how it much??
-
- Expert
- Posts: 3052
- Joined: Fri Mar 28, 2003 3:51 am
- Location: York, PA
- Contact:
Re: why we convert
I'll do a write up when I do mine.lanos99 wrote:hi there
i have lanos 99 auto trans
it works will, but in case that i have trouble with the auto trans i'll think to convert to manual ,
so I'd like to know exactly , can I convert without problems our bad result ?
and what I need to convert and how it much??