x2, You dont have to prime it but you should; Use high build primer . You will beable to see if there is any big scratches in it and it will fill in little ones. Let it dry, give it a good sand. SInce you are using spray bomb, use light coats.daewoomofo wrote:prime that bitch, take your time do it nice. if you rush it it will turn out shitty
The longest Thread ever!!!
Moderators: daewoomofo, Moderators Group
Re: The longest Thread ever!!!
The Few.... The Proud.... The Boosted
Re: The longest Thread ever!!!
+1 mofo...from my experience... spend more time on the prep than paintdaewoomofo wrote:prime that bitch, take your time do it nice. if you rush it it will turn out shitty
+1 on light coatsRSZT4 wrote:x2, You dont have to prime it but you should; Use high build primer . You will beable to see if there is any big scratches in it and it will fill in little ones. Let it dry, give it a good sand. SInce you are using spray bomb, use light coats.
~2.0L Lanos~EHPAS~H&R Springs~KYB/GTS Shocks~
Re: The longest Thread ever!!!
HAHA I just realised that today is my one year anniversary since joining daewootech.com
~2.0L Lanos~EHPAS~H&R Springs~KYB/GTS Shocks~
-
mikedudley17
- Super
- Posts: 251
- Joined: Sat Nov 10, 2007 2:18 pm
Re: The longest Thread ever!!!
im going to prep it today with 2 coats then sand it to
after sanding it, can i do one more cat of primer sanding it or not? or just paint it after primer is finnished?
after sanding it, can i do one more cat of primer sanding it or not? or just paint it after primer is finnished?
Re: The longest Thread ever!!!
give it 2 good coats and then sand it again to make sure there isnt no scratches or dips or anything then you can give it a light coat, then go onto painting.
The Few.... The Proud.... The Boosted
Re: The longest Thread ever!!!
LOL i didnt even realize i have 112 post now LOL I've pretty much spammed this board with useless antics and nonsence and no ones said a thing! 
also why am i junior....I call...something...discrimination...I dont like junior
also why am i junior....I call...something...discrimination...I dont like junior
The Few.... The Proud.... The Boosted
Re: The longest Thread ever!!!
just got a question, why do u have little oil before the throttle body?, is it possible that one hose is cluged (by pass valve)
Re: The longest Thread ever!!!
buddha102 wrote:just got a question, why do u have little oil before the throttle body?, is it possible that one hose is cluged (by pass valve)
LOL what?
The Few.... The Proud.... The Boosted
Re: The longest Thread ever!!!
When i was doing my camshaft sensor, I had to take the intake out so wont be in my way... but there was some oil on the throttle plate and before it was like a small stream of oil... and the intake tube was filled with oil... i suspect that one of the bypass valve is kluged... but how? 
