I'm putting in a new head unit,but I'm having trouble finding the dash install kit locally.I only seem to see the Woo ones online.
Does anyone know if this one will fit the lanos?
http://walmart.scosche-cars.com/product ... ID=1863070
It mentions that it fits a ton of imports,but not the woo. Anybody used one ?
I think I saw a universal one,would that do the trick.? I need the kit because the head unit sleeve just goes right through the hole,I think there is a small trim piece missing,and even if I bend the little tabs on the sleeve,it dosent grip anything
Lanos Dash Install Kit Question
Moderators: daewoomofo, Moderators Group
- BosnianLanos
- Expert
- Posts: 1661
- Joined: Thu May 27, 2004 10:31 pm
- Location: Clearwater, Florida
- Contact:
Order it, and a wiring harness from http://www.cardomain.com they have both in stock, and a perfect fit for the Daewoo. Its cheap, and it'll be to your door in 2-3 days, since Vegas is close to their distribution center.
-
- Moderator
- Posts: 4795
- Joined: Fri Nov 18, 2005 1:41 am
- Location: 313
Mine was from Circuit city...but I got it like three years ago and the manager had to dig in the back to find it and when he brought it out it was covered in dust and one of the screw holes was broken off...but I got it for 5 bucks so I didn't care and fixed it with a washer. Seeing as how they had it then they can probably still order them.
Jimmy
Jimmy
Thanks for the replies guys. I actually went out on a mission before you guys replied. I took a chance on a GM 94 and up kit (it looked like the closest match) with the intention of modifying it slightly,which I just did with my trusty rotary tool,and I got it to fit in (barely!) inside the existing U shaped trim piece.
Minor trimming was neccessary ,but I thought, F+++ it,it was only like 9 bucks.
Here's how it looks now that it's fitted:
I think has a nice stock look to it.
And here's the reason I wanted a new one ...
Junk or what !! The brand name on this piece of crap is Namsung. I had never heard of this brand,and I hope i never do again. One RCA output so I had to split it off into 2. It was in the car when I bought it. I had replaced it once already with a Pioneer deck,but that went wrong so I put the junker back in again,til now.
Woohoo,now I can listen to MP3's again.
Minor trimming was neccessary ,but I thought, F+++ it,it was only like 9 bucks.
Here's how it looks now that it's fitted:
I think has a nice stock look to it.
And here's the reason I wanted a new one ...
Junk or what !! The brand name on this piece of crap is Namsung. I had never heard of this brand,and I hope i never do again. One RCA output so I had to split it off into 2. It was in the car when I bought it. I had replaced it once already with a Pioneer deck,but that went wrong so I put the junker back in again,til now.
Woohoo,now I can listen to MP3's again.
.
.
.