WILL THIS WORK ON MY WOO??

Slammed · Post by **Slammed** » Fri May 12, 2006 2:50 am

I was able to find a dash cluster with tach for my 2000 daewoo Lanos it is off of a 99 daewoo lanos but it was automatic and I have manuel tranny will it work ??

JohnnyC · Post by **JohnnyC** » Fri May 12, 2006 3:17 am

I believe the sensors transmit to the ECU and not directly to the cluster. My guess is yes it will... just make sure it has the same dials and such (same speed max, etc).

Not 100% on that... but I'm pretty sure that's right.

Slammed · Post by **Slammed** » Fri May 12, 2006 3:29 am

thanks for the quick reply here is the link I just did not want anybody to buy it before me lol its been the talk lately

http://stores.ebay.com/Used-Auto-Parts- ... idZ2QQtZkm

MMamdouh · Post by **MMamdouh** » Fri May 12, 2006 9:53 am

JohnnyC wrote:Not 100% on that... but I'm pretty sure that's right.

+1

never saw any difference between clusters that came out of a MT and those from AT... 97% it will work just fine.

MMamdouh

Slammed · Post by **Slammed** » Sun May 21, 2006 1:59 am

ALLRIGHT I have some great news HAHAHAHAHA I installed my new cluster with tach and it worked and it was easy as pie pie pie I tell ya LOL heres some pics

MMamdouh · Post by **MMamdouh** » Sun May 21, 2006 10:13 am

congrats man... another proof that the tach cluster is a direct swap.

again a proof that a tach signal is available at the OEM cluster socket but which one is it?? i found a green with black strip cable at pin #2 on the right most socket and hooked it to an aftermarket tach but it didn't work... anyone know which cable is the tach signal on the cluster's socket??

MMamdouh

MMamdouh · Post by **MMamdouh** » Sun May 21, 2006 10:14 am

and OH yeah... paint that dash in silver, it will look hot as hell.

MMamdouh

Slammed · Post by **Slammed** » Sun May 21, 2006 2:41 pm

That would look hot I might do that

MMamdouh · Post by **MMamdouh** » Sun May 21, 2006 4:23 pm

i already did it and it is hot indeed
http://www.daewootech.com/forum/viewtopic.php?t=2564

MMamdouh

racer95 · Post by **racer95** » Sun May 21, 2006 9:08 pm

hey guys.
i have the same problem in my racer.i buy an rpm clock and putted,bcz i dont have this in my car since i get it from the Daewoo company.but after that my dont start naturally.it want time to work i didnt have this problem be4 i putted this clock.and another problem is when i accelerate the engine seem to turn off.
btw the electrician didnt know anything about this problem and of course its not resoluted.the electrician take the cables from one cable in the disparator and the another from the battery.
so any one know what is the problem?or what should i do?the problem might be from the RPM clock inspite of its working but makes troubles.i need ur helps guys.

MMamdouh · Post by **MMamdouh** » Sun May 21, 2006 9:58 pm

probably the guy screwd up the wiring during the job... double check the wiring from the distributer.

MMamdouh

racer95 · Post by **racer95** » Mon May 22, 2006 12:19 am

the rpm clock work.is there a probability the problems comes from this clock?or its a false from the electrician?

MMamdouh · Post by **MMamdouh** » Mon May 22, 2006 7:20 am

thats what i said... electrican might have messed some wiring or so... recheck to be sure.

MMamdouh

racer95 · Post by **racer95** » Fri May 26, 2006 1:14 pm

slammed i want to ask u how did u did that?
did u just get the dash cluster and connected with ur car or did u connect the RPM from the engine?
bcz the same with me my racer come without RPM and i try what u did and not working.
i need ur help

Slammed · Post by **Slammed** » Fri May 26, 2006 4:20 pm

No all I did was by the cluster and plug it in to the stock wiring no modifications just plug and play