i have a 5 sp lanos nd cant get the stock knob off i looked in the how to section but the picture wont show up for me so basically no help there can n e one explain or have a pic of what to do
use a flat-head screwdriver and pop off the clip off the bottom of the shaft. rotate it to the left until it will slide towards the rear of the car. pull the clip thing out, and the shifter should lift right out.
okay man i don't know where ya'll left off at but you have to either take off the know completely (i haven't done this) and do the water thing or you can do what i did. i cut off the rubber part then melted the hard plastic piece off with a mini blowtorch while it was still in my car. now i don't recommend the blow torch for obvious reasons but you might be able to cut through the hard plastic as well. it'll just take longer unless you have a electric cutter.
[img]C:\Documents%20and%20Settings\Michael\My%20Documents\My%20Pictures\2006_01_10\1.jpg[/img]
[img]C:\Documents%20and%20Settings\Michael\My%20Documents\My%20Pictures\2006_01_10\2.jpg[/img]
this is what i see