How to set EFILive V4 with ALDL/USB cable.

[Daniele84]

Hello.
I wanted to know what are the settings to work properly my ALDL/USB cable with EFILive PRO V4, my problem is as follows:
When push "START ALDL" whith F3 Key the dashboard feature is activated for a short time and stops. why? and the charts not working for nothing,

I have Daewoo Lanos 1.6 SX 1998 with ALDL connector

i use this cable

http://www.aldlcable.com/sc/details.asp?item=aldlobd1u

Sorry for my bad english.

[MMamdouh]

are you sure you are not in the testing macro mode?

MMamdouh

[Daniele84]

I do not know, how do I know ?

[Daniele84]

yesterday I changed some settings, now when I press on "AUTOMATICALLY DETECT CHATTER", in macros window MAX232 INTERFACE turn in green and appears INTERFACE DETECT OK, but in CHATTER does not work and the program crashes.

[MMamdouh]

I do not know, how do I know ?

their should be a pop up message informing you that you are in testing mode, the ALDL read will start and stop automatically and the gauges will move to top readings and go back to 0

MMamdouh

[Daniele84]

I checked and it is not activated the macro test. but when I start the "get data engine DTC ", works perfectly, control errors "chatter" will not work.

[Daniele84]

I damaged my ALDL cable / USB, i changed my settings cable with mprog 3.5 and now the cable does not work, you can use mprog 3.5 for read you settings cable and send me the image with your settings cable ? urgently please
now have contacted ALDLCABLE.com for send me new settings for my cable, but don't replied.

[MMamdouh]

i don't have the cable... i was just testing the software and cable for a friend and i was giving advise based on that limited experience...

i'd love to help you more but unfortunately i can't

MMamdouh

[Daniele84]

thanks mmamdouh for helping me, problem solved, i could find the correct settings, and now work perfectly.