Interior paint

Car Audio, Controllers, Wiring, Seats, Carpet, Interior painting, and more...

Moderators: daewoomofo, Moderators Group

bluesheepbrian
Expert
Posts: 459
Joined: Tue Nov 11, 2003 3:44 am
Location: Arundel, ME
Contact:

Interior paint

Post by bluesheepbrian »

Was checking the other posts, found out an idea how to paint my interior.
Any body have anything current on what I can use, was going to use Krylon. Going for a light tan or cream color.

How do you also color or paint the fabric/cloth that is on the driver and
passengers doors.
User avatar
AcingTeam
Expert
Posts: 2700
Joined: Thu Jun 17, 2004 2:48 am
Location: New Milford, CT
Contact:

Post by AcingTeam »

Use crayons!!! yeay!!
Image
bluesheepbrian
Expert
Posts: 459
Joined: Tue Nov 11, 2003 3:44 am
Location: Arundel, ME
Contact:

Post by bluesheepbrian »

Are you serious, crayons? Or are u just playin'?
TheGreatAndPowerfulOz
All Powerful
Posts: 2767
Joined: Thu May 01, 2003 10:37 pm
Location: Virginia, USA
Contact:

Post by TheGreatAndPowerfulOz »

Of course he is playing. You need to melt Gummy Bears into a warm goo and then brush the goo onto the interior plastic. When it cools down, you will have a nice new, sweet, fruity, chewey interior!

YUM!

Image

.....

Seriously, this is the tuff you want to use: Krylon Fusion.
http://www.dickblick.com/zz014/11/produ ... ig_id=6372

http://www.krylon.com/main/product_temp ... ct_details

Image

I hope this helps!

Cliff
bluesheepbrian
Expert
Posts: 459
Joined: Tue Nov 11, 2003 3:44 am
Location: Arundel, ME
Contact:

Post by bluesheepbrian »

Thanx alot, I will still get the gummy bears though.

The Krylon wont mess up the fabric on the driver and passenger doors?
TheGreatAndPowerfulOz
All Powerful
Posts: 2767
Joined: Thu May 01, 2003 10:37 pm
Location: Virginia, USA
Contact:

Post by TheGreatAndPowerfulOz »

DO NOT PAINT with the door panels still on the doors!

Remove the door panels, and then from the back of the door panels, unfold the tabs that hold the fabric covered ram rest in place.
You will have to pry the arm rests off once you have unfolded the lock tabs because it is glued on, too.

Once you have the panel off and the arm rests removed, then paint with several light coats so the panel is covered evenly.

It would be a very good idea to clean the door panel with denatured alcohol to break up any oil and remove any impurities from the surfaces that will be painted.
User avatar
KnightWalace
Expert
Posts: 756
Joined: Mon Mar 01, 2004 9:48 pm
Contact:

Post by KnightWalace »

Don't forget after your done to show us pics!
2004 Mitsubishi Lancer Ralliart
Stock.. Till summer (good job coming)

RRM Turbo Kit
VRS 3" Exhaust with a MeganRacing Carbon Fiber muffler.
Some other goodies.
daewooluvr
Expert
Posts: 3052
Joined: Fri Mar 28, 2003 3:51 am
Location: York, PA
Contact:

Post by daewooluvr »

I wonder if that new paint fills in the texture in the plastic. That's the part that drives me nuts the most. I hate the "rubbermaid" interior that GM and other car makers use.
2000 Daewoo Lanos HB - Its green

Check me out at http://sdconsulting.weebly.com
scarr
Junior
Posts: 104
Joined: Thu Jul 29, 2004 8:33 am
Location: Fort Worth, TX

Post by scarr »

that krylon fusion paint does not fill in the rubbermaid effect thats on the dashwork, the only way you can get rid of that is to wetsand your dash pieces down and primer, paint, and then clearcoat it afterwards, the krylon paint comes off when you use armorall on it so i would definately recommend clearcoating it, ill have pictures of my dash before wetsanding and everything else with the rubbermaid effect soon
daewooluvr
Expert
Posts: 3052
Joined: Fri Mar 28, 2003 3:51 am
Location: York, PA
Contact:

Post by daewooluvr »

Wetsanding the "rubbermaid" plastic... obviously you haven't tried it yet. That plastic is really REALLY hard. I was using 80 grit at one point and it still wasn't smoothing out that fast. Just take you time with it and it'll get done right.
2000 Daewoo Lanos HB - Its green

Check me out at http://sdconsulting.weebly.com
TheGreatAndPowerfulOz
All Powerful
Posts: 2767
Joined: Thu May 01, 2003 10:37 pm
Location: Virginia, USA
Contact:

Post by TheGreatAndPowerfulOz »

I wonder what the gummy bear coating needs clear coating or if it will peel off with armor all?

LOL


Personally, I like the textured look of the interior plastic better than the smooth look ... but that is just me. :)

Cliff
Blue Lanos
Posts: 72
Joined: Sat Oct 18, 2003 3:31 pm
Location: Slovakia (Europe)
Contact:

Post by Blue Lanos »

This is the creation from one of our member. Is it sprinkled only withe spray. I think that finish solution is very nice :lol: Look at the pictures!

Image

Image

Image

http://lanos.jinak.cz/akonato/striekanie_palubovky.html May be someone understand Slovak :lol: :lol:
CzechoSlovak LANOS Club http://www.lanosclub.com
CzechoSlovak Daewoo Forum http://www.daewooclub.com
My lanos - Cardomain.com
http://www.cardomain.com/id/27101976
Goldenboy
Super
Posts: 221
Joined: Fri Sep 26, 2003 11:02 pm
Location: Canada,Quebec

Post by Goldenboy »

Hi let me know if you need any advice on interior painting as some of you already know I did all my itnerior this winter.

Here are some of the pics

Image

Image

Image

Mat 8)
Wolf-Spirit
Expert
Posts: 375
Joined: Fri May 07, 2004 1:19 pm
Location: Belgium

Post by Wolf-Spirit »

wow never saw those last 2 pics.... very nice indeed... but isnt there a huge sun reflection on the dash when driving? :s
daewooluvr
Expert
Posts: 3052
Joined: Fri Mar 28, 2003 3:51 am
Location: York, PA
Contact:

Post by daewooluvr »

Wolf-Spirit wrote:wow never saw those last 2 pics.... very nice indeed... but isnt there a huge sun reflection on the dash when driving? :s
get sunglasses ;) it's worth it
2000 Daewoo Lanos HB - Its green

Check me out at http://sdconsulting.weebly.com
Locked