window pulley removal

blackielaw · Post by **blackielaw** » Sat Jul 30, 2005 10:26 am

Can anybody shed some light on how to remove the rear window handle please ? trying to remove the rear door interior panel but am stuck until I remove the window lever. Thanks

MMamdouh · Post by **MMamdouh** » Sat Jul 30, 2005 12:25 pm

you got to remove the G shaped metal clamp off the handle to remove it.

their is a special tool to remove it but if you can't get one use a very small screw driver and try to yank off the clamp... it is going to be hard job and watch out not to scratch the door.

MMamdouh

blackielaw · Post by **blackielaw** » Sat Jul 30, 2005 2:20 pm

Yeah I realised that! However can't even reach the metal clamp from anywhere, gonna be tougher than I expected

TheGreatAndPowerfulOz · Sat Jul 30, 2005 8:09 pm

I got a small, cheap screw driver and curled the tip of it into a small hook shaped end.

I also bent the shaft of the screw driver so the end could fit under the crank handle some what like this: (handle) ==---\__ (tip)

That screw driver can reach right under the crank handle and pop the retainer clip off.

blackielaw · Post by **blackielaw** » Sun Jul 31, 2005 3:59 pm

I managed. Thanks for your help.