Hey,
Has anyone fitted any clear side guard indicators to replace the big ugly orange ones?
If so, what type and pics if possible
Thanks
Clear side guard indicators...
Moderators: daewoomofo, Moderators Group
Clear side guard indicators...
Girlfriend's...
2000 Daewoo Lanos 'Sports' 3-Door (Silver, 1.6ltr 5spd)
Me...
1980 Mitsubishi GH SE Sigma (SIKMA) 123.5kws @ wheels, 14.88 @ 92.58mph
2004.5 Holden XC Barina (CORSA)
2005 Bolwell 50cc scooter
2000 Daewoo Lanos 'Sports' 3-Door (Silver, 1.6ltr 5spd)
Me...
1980 Mitsubishi GH SE Sigma (SIKMA) 123.5kws @ wheels, 14.88 @ 92.58mph
2004.5 Holden XC Barina (CORSA)
2005 Bolwell 50cc scooter
I just used universal ones and cut the old ones off and replaced wires.
1999 3-door HB Lanos 1349cc SOHC - 16" Alloys, Short Ram Intake, Strutbar, Alarm & Remote Locking, Electric Windows, CarPC!
www.norbie.co.uk
^^^ Did they fit straight in? I know how to get the old ones out, and I have found a few clear indicators but they are too big for the holes! I dont wana mod the guards!
TIM... cheers 4 the link As above did the commy ones fit straight in? Didnt have to modify the indicator plastics to fit them in the holes at all?
Thanks
TIM... cheers 4 the link As above did the commy ones fit straight in? Didnt have to modify the indicator plastics to fit them in the holes at all?
Thanks
Girlfriend's...
2000 Daewoo Lanos 'Sports' 3-Door (Silver, 1.6ltr 5spd)
Me...
1980 Mitsubishi GH SE Sigma (SIKMA) 123.5kws @ wheels, 14.88 @ 92.58mph
2004.5 Holden XC Barina (CORSA)
2005 Bolwell 50cc scooter
2000 Daewoo Lanos 'Sports' 3-Door (Silver, 1.6ltr 5spd)
Me...
1980 Mitsubishi GH SE Sigma (SIKMA) 123.5kws @ wheels, 14.88 @ 92.58mph
2004.5 Holden XC Barina (CORSA)
2005 Bolwell 50cc scooter
They covered the holes nicely yeah, didnt want to drill to screw in so used some bolts and nuts to hold it in place.
Glue was a bit extreme and awkward if you need to change a bulb.
Glue was a bit extreme and awkward if you need to change a bulb.
1999 3-door HB Lanos 1349cc SOHC - 16" Alloys, Short Ram Intake, Strutbar, Alarm & Remote Locking, Electric Windows, CarPC!
www.norbie.co.uk
No, they're not a drop in replacement. I had to file the cylinder part of the indicator where the bulb socket screws in and the plastic retaining arm. They were just a little to fat for the hole.mr_sikma wrote:TIM... cheers 4 the link As above did the commy ones fit straight in? Didnt have to modify the indicator plastics to fit them in the holes at all?
--Tim