Clear side indicators
Moderators: daewoomofo, Moderators Group
Clear side indicators
Does anyone know what off what car I could get clear side indicators to fit my 3dr Lanos 02 (Aus)?
-
- Moderator
- Posts: 4795
- Joined: Fri Nov 18, 2005 1:41 am
- Location: 313
I've got some new side indicators to replace the stock ones, how can I get them off?
1999 3-door HB Lanos 1349cc SOHC - 16" Alloys, Short Ram Intake, Strutbar, Alarm & Remote Locking, Electric Windows, CarPC!
www.norbie.co.uk
Press the orange lens against the car (like you were trying to push it into the engine bay) and then slide it towards the rear of the car.norbie wrote:I've got some new side indicators to replace the stock ones, how can I get them off?
It should just pop out... you dont need screw drivers or anything
--Tim
Why thankyou, it works
1999 3-door HB Lanos 1349cc SOHC - 16" Alloys, Short Ram Intake, Strutbar, Alarm & Remote Locking, Electric Windows, CarPC!
www.norbie.co.uk
I've taken mine off and want to replace them with some that I have.
They need to be screwed on, and I'm not messing about with drilling holes.
Can i cut the wires off the existing ones, connect the wires to the new ones and glue onto the car?
What glue will be suitable? Just normal superglue?
They need to be screwed on, and I'm not messing about with drilling holes.
Can i cut the wires off the existing ones, connect the wires to the new ones and glue onto the car?
What glue will be suitable? Just normal superglue?
1999 3-door HB Lanos 1349cc SOHC - 16" Alloys, Short Ram Intake, Strutbar, Alarm & Remote Locking, Electric Windows, CarPC!
www.norbie.co.uk
You could potentially - but what if the bulb busts? How will you get to the socket to change the bulb if its glued down?norbie wrote:I've taken mine off and want to replace them with some that I have.
They need to be screwed on, and I'm not messing about with drilling holes.
Can i cut the wires off the existing ones, connect the wires to the new ones and glue onto the car?
What glue will be suitable? Just normal superglue?
I'd be drilling the holes - and then posting photos
--Tim
Ok, how would I drill the holes?
Obviously I would have to get a drill, but is there a special kind I need, and would it not damage the car?
Obviously I would have to get a drill, but is there a special kind I need, and would it not damage the car?
1999 3-door HB Lanos 1349cc SOHC - 16" Alloys, Short Ram Intake, Strutbar, Alarm & Remote Locking, Electric Windows, CarPC!
www.norbie.co.uk
I'd use a drill to drill the holes
Ummm... i might centre punch the hole (you might need something solid behind the metal like a block of wood so the metal doesnt buckle) and then put masking tape over the paint work so the drill doesn't dance around. Don't forget to use a pilot drill too - that'll help...
--Tim
Ummm... i might centre punch the hole (you might need something solid behind the metal like a block of wood so the metal doesnt buckle) and then put masking tape over the paint work so the drill doesn't dance around. Don't forget to use a pilot drill too - that'll help...
--Tim
lol, it sounds like I'm going for the superglue option then.
I can change the bulb from the outside part of it, so I don't think it will be a problem.
I can change the bulb from the outside part of it, so I don't think it will be a problem.
1999 3-door HB Lanos 1349cc SOHC - 16" Alloys, Short Ram Intake, Strutbar, Alarm & Remote Locking, Electric Windows, CarPC!
www.norbie.co.uk
What type of glue should I use?
1999 3-door HB Lanos 1349cc SOHC - 16" Alloys, Short Ram Intake, Strutbar, Alarm & Remote Locking, Electric Windows, CarPC!
www.norbie.co.uk
Glue
Gorilla glue has always worked for me, just make sure you get it exactly where u want it because its hell to get off and it will damage your paint if not careful. i thought it would be easier and better if u could of drilled but oh well. it s whater ever you choose though.
WOOOOO HOOOOO for a DAEWOO!!
-SRI -RE:APC STAINLESS STEEL PERFORMANCE FILTER
-VALVE COVER VENT FILTER
-CUSTOM ROD CRYSTAL DRIVING LIGHTS
-1200W AMP WITH 12" SUB -KICKS WOO BUTT!!!!!
-SRI -RE:APC STAINLESS STEEL PERFORMANCE FILTER
-VALVE COVER VENT FILTER
-CUSTOM ROD CRYSTAL DRIVING LIGHTS
-1200W AMP WITH 12" SUB -KICKS WOO BUTT!!!!!