Clear / Altezza Style Rear Lights...

Body Kits, Rims, Suspension, Wings, Lighting etc and exterior detailing.

Moderators: daewoomofo, Moderators Group

mr_sikma
Posts: 58
Joined: Fri Nov 18, 2005 3:27 am
Location: Adelaide, SA
Contact:

Clear / Altezza Style Rear Lights...

Post by mr_sikma »

Hey,

Anyone know where I can get these lights from?

http://memimage.cardomain.net/member_im ... 6_full.jpg

Thanks
Girlfriend's...
2000 Daewoo Lanos 'Sports' 3-Door (Silver, 1.6ltr 5spd)

Me...
1980 Mitsubishi GH SE Sigma (SIKMA) 123.5kws @ wheels, 14.88 @ 92.58mph
2004.5 Holden XC Barina (CORSA)
2005 Bolwell 50cc scooter
User avatar
AcingTeam
Expert
Posts: 2700
Joined: Thu Jun 17, 2004 2:48 am
Location: New Milford, CT
Contact:

Re: Clear / Altezza Style Rear Lights...

Post by AcingTeam »

mr_sikma wrote:Hey,

Anyone know where I can get these lights from?

http://memimage.cardomain.net/member_im ... 6_full.jpg

Thanks
You have to custom make them from 2001+ stock hb tails.
Image
mr_sikma
Posts: 58
Joined: Fri Nov 18, 2005 3:27 am
Location: Adelaide, SA
Contact:

Post by mr_sikma »

Or even the rhs clear light to replace our red one?

http://www.daewootech.com/forum/album_p ... ic_id=1477
Our rear lights with red fog light and clear reverse

http://memimage.cardomain.net/member_im ... 3_full.jpg
USA Lanos with clear fog light and reverse

Is that standard for the US model?

So the pic in the first post means he would have had them custom made!?!
Girlfriend's...
2000 Daewoo Lanos 'Sports' 3-Door (Silver, 1.6ltr 5spd)

Me...
1980 Mitsubishi GH SE Sigma (SIKMA) 123.5kws @ wheels, 14.88 @ 92.58mph
2004.5 Holden XC Barina (CORSA)
2005 Bolwell 50cc scooter
mr_sikma
Posts: 58
Joined: Fri Nov 18, 2005 3:27 am
Location: Adelaide, SA
Contact:

Post by mr_sikma »

Last edited by mr_sikma on Sun Oct 01, 2006 11:30 am, edited 1 time in total.
Girlfriend's...
2000 Daewoo Lanos 'Sports' 3-Door (Silver, 1.6ltr 5spd)

Me...
1980 Mitsubishi GH SE Sigma (SIKMA) 123.5kws @ wheels, 14.88 @ 92.58mph
2004.5 Holden XC Barina (CORSA)
2005 Bolwell 50cc scooter
delphis
Expert
Posts: 724
Joined: Tue Mar 01, 2005 7:05 pm
Location: San Fransisco Bay Area
Contact:

Post by delphis »

the us models dont have reverse fog lights so both of the lights on the hatch itself are clear stock. to do the mod you must heat in oven and then remove the colored insert and then reheat to put back together. there is a post on how to do the mod in the how to section I beleive.
1989 240sx fastback with SR20DE
User avatar
AcingTeam
Expert
Posts: 2700
Joined: Thu Jun 17, 2004 2:48 am
Location: New Milford, CT
Contact:

Post by AcingTeam »

Use the search function. I think OZ posted a how-to way back, I did too. It was a while ago, search for it.

And yes, he had custom made it from stock tails.
Image
mr_sikma
Posts: 58
Joined: Fri Nov 18, 2005 3:27 am
Location: Adelaide, SA
Contact:

Post by mr_sikma »

ok cheers guys...

can someone please some pics of the different lights through they years?

and do all they fit and interchange with each other?

Thanks
Girlfriend's...
2000 Daewoo Lanos 'Sports' 3-Door (Silver, 1.6ltr 5spd)

Me...
1980 Mitsubishi GH SE Sigma (SIKMA) 123.5kws @ wheels, 14.88 @ 92.58mph
2004.5 Holden XC Barina (CORSA)
2005 Bolwell 50cc scooter
ChiPPy
Junior
Posts: 120
Joined: Tue Nov 30, 2004 4:13 am
Location: Ontario, Canada

Post by ChiPPy »

Sorry, a little off topic, but here goes. Sikma, do you have a car domain site with pics of your cars? I had a 79 Sigma when I was in Australia, and I loved it to death. It was the first year they were made, and the last year of the Chrysler corporation in Austalia, until they released the Neon. :D
My Chevy Woo
Image
2004 Chevy Optra 5
MMamdouh
Moderator
Posts: 7299
Joined: Wed Feb 18, 2004 8:33 am
Location: Cairo, Egypt
Contact:

Post by MMamdouh »

Driving is the utmost fun you can have with your pants on!
Check out my ride: http://www.cardomain.com/ride/567267
Image
mr_sikma
Posts: 58
Joined: Fri Nov 18, 2005 3:27 am
Location: Adelaide, SA
Contact:

Post by mr_sikma »

would there be enough heat in a hair dryer???
Girlfriend's...
2000 Daewoo Lanos 'Sports' 3-Door (Silver, 1.6ltr 5spd)

Me...
1980 Mitsubishi GH SE Sigma (SIKMA) 123.5kws @ wheels, 14.88 @ 92.58mph
2004.5 Holden XC Barina (CORSA)
2005 Bolwell 50cc scooter
bluesheepbrian
Expert
Posts: 459
Joined: Tue Nov 11, 2003 3:44 am
Location: Arundel, ME
Contact:

Post by bluesheepbrian »

I did not have much luck with the hair dryer, took to long & did not quite get hot enough. So i invested on hot air gun. Tha worked much better, just be carefull not to get the plastic too hot or it will melt. Did in that on mine in a couple of places.
2002 Daewoo Lanos HB
www.evo-imports.com
www.myspace.com/bluesheepbrian
"Beating a Honda is like banging a fat chick. Everyone can do it but who wants to brag about it?"
delphis
Expert
Posts: 724
Joined: Tue Mar 01, 2005 7:05 pm
Location: San Fransisco Bay Area
Contact:

Post by delphis »

I have one full right hand side set of the 2001 tail lights for sale in the classifieds section under the cai and strut bar.
1989 240sx fastback with SR20DE
mr_sikma
Posts: 58
Joined: Fri Nov 18, 2005 3:27 am
Location: Adelaide, SA
Contact:

Post by mr_sikma »

delphis wrote:I have one full right hand side set of the 2001 tail lights for sale in the classifieds section under the cai and strut bar.
I am in AUS, do me a good deal on postage aswell and I am interested ;)
Girlfriend's...
2000 Daewoo Lanos 'Sports' 3-Door (Silver, 1.6ltr 5spd)

Me...
1980 Mitsubishi GH SE Sigma (SIKMA) 123.5kws @ wheels, 14.88 @ 92.58mph
2004.5 Holden XC Barina (CORSA)
2005 Bolwell 50cc scooter
gtwoo'd
Posts: 25
Joined: Wed Mar 22, 2006 7:59 am
Location: Australia, Gold Coast

Re: Clear / Altezza Style Rear Lights...

Post by gtwoo'd »

mr_sikma wrote:Hey,

Anyone know where I can get these lights from?

http://memimage.cardomain.net/member_im ... 6_full.jpg

Thanks
Hey mr_sikma, yeah they took me some time to do, i didn't actually follow the instructions off of here, but instead I've used a dremel to cut off the plastic faces, then cleaned them up and once i was happy with how it was going to look, i used black sikaflex to glue them back up.
Image
I also took the time to cut out the colour parts so i could use the inner frame part.
TheGreatAndPowerfulOz
All Powerful
Posts: 2767
Joined: Thu May 01, 2003 10:37 pm
Location: Virginia, USA
Contact:

Post by TheGreatAndPowerfulOz »

mr_sikma wrote:http://www.totalglobaldomination.org/im ... /lense.jpg

How where these made?

Thanks
:lol: That looks familiar!
Locked