Forenza Body kit, and lowering springs.

bsharon · Post by **bsharon** » Tue Nov 23, 2004 2:01 pm

Hi, This may be an old subject, but I have not seen anything on it in a while. I have been a member since I got my forenza and everyone keeps telling me to wait a little while for parts. But the Intimidator web site is finally in English. But I still don't see anything on there for a forenza. Can someone help me find a body kit and a set of nice loveing springs? thanks

Brian

kinkyllama · Post by **kinkyllama** » Tue Nov 23, 2004 5:03 pm

http://www.360dynamics.ca/Splash.htm

when i get home i can give you a link for the springs, its Team SR-R website that has em.

kinkyllama · Post by **kinkyllama** » Fri Nov 26, 2004 4:18 am

Sorry it took me so long. . . http://www.evofusionusa.com/TeamSR/Suzu ... rings.html

theres the springs, 1.2 inches all around. Although the car seams a tiny bit lower in the front which is a good thing since its front wheel drive.

GsiTurbo · Post by **GsiTurbo** » Fri Nov 26, 2004 6:19 am

So what exactly the problem was with the install. You said the drop isnt enough, and that you had problems with the rear. What was that all about?

I am suspecting the evofusion might just have quicly find a fit from a similar vehicle, and sell it as Forenza springs. Dunno....

kinkyllama · Post by **kinkyllama** » Fri Nov 26, 2004 6:24 am

We since i got the new springs i havnt loaded the car full of people yet so i dont know how much more of a drop i can afford before i cant haul anyone around. but theses springs are 1.2 all around. Id say something like 1.75 in the front and 1.5 in the back would be nice. Cuz even with the lowering springs i still have that "lifted" look you get with aftermarket rims that lowering springs usually get rid of, even though its not as bad.

I had a shop do it and they said that... uhh. I cant remember exactly, i wrote it down somewhere but i cant find it now. But the front fit perfect. The rear fit wasnt perfect (they think the springs are made for A suzuki, but probably not mine. I contacted them before buying the springs and they said the spring WERE for the forenza, and even tested on it) Anyway... the stock springs were a perfect circle on the top, but on the bottom of the spring the circle stopped halfway and curved in. The new springs were full cirlces top and bottom. Ill take pics in about 10 mins of the old springs.

kinkyllama · Post by **kinkyllama** » Fri Nov 26, 2004 6:43 am

http://www.daewootech.com/forum/album_p ... pic_id=559

Ok, tthats one of the old stock back springs. You can see on the left side its smaller. Well the new ones are the same size and that part doesnt fit perfectly, it fits around it lose. But ive put 900 miles on them with zero problems.