Knocking sound [solved]

Body Kits, Rims, Suspension, Wings, Lighting etc and exterior detailing.

Moderators: daewoomofo, Moderators Group

Locked
Daniel
Expert
Posts: 1298
Joined: Mon May 03, 2004 8:28 am
Location: Belgium

Knocking sound [solved]

Post by Daniel »

Guys,

While driving there is a knoking sound coming from front on every bumps in the road. I did not hear it (or a lot less) around corners. Thinking at worn bushings they (4) were replaced and outer tie rods checked for play with a craw bar. Same test for stabilizer links. While turning steering wheel at a stop there is a louder click by turning from center to right & back than by turning from center to left & back. Hope you understand what I mean :oops: .
Could it be a inner tie rod or not? How to be sure?

Thanks,

Daniel

Nubira wagon 2000 1.6 DOHC (EU)
103000 km.
Last edited by Daniel on Sun Jul 06, 2008 7:55 am, edited 2 times in total.
Pir0
Expert
Posts: 1256
Joined: Tue Nov 27, 2007 9:25 pm
Location: Ireland

Post by Pir0 »

Are both of your shocks tight into the strut top? Friend had a similar problem in his nexia. Didnt knock or click round corners but did over bumps. Also just check the track rods [tie rods?], might be catching on something.
SAZ
---------------------
Image
Daniel
Expert
Posts: 1298
Joined: Mon May 03, 2004 8:28 am
Location: Belgium

Post by Daniel »

Thanks. I'll check that. Sould I look also to the big center nut retaining the piston's strud rod?
daewoomofo
Moderator
Posts: 4795
Joined: Fri Nov 18, 2005 1:41 am
Location: 313

Post by daewoomofo »

cant hurt
Image

Help keep Daewootech spam free, reply "Killspam" (no spaces) to spam posts

yeah i cant type, so what big freaking deal!
Daniel
Expert
Posts: 1298
Joined: Mon May 03, 2004 8:28 am
Location: Belgium

Still looking

Post by Daniel »

Torque checked.

But still looking for this annoying noise. I discovered that I can axially move the right axle shaft by about 6mm. The left axle has less play. Is that a normal play or maybe the source of this noise. It's like knocking two pieces of wood on themselves. Is it a possibility that one clip #10 is loose?

Image

This noise is present on bumps when:
-accelerate.
-steady speed.
-decelerate.
-braking.

It ceases when I make a left or right turn.

:smt017

Any more idea?

Daniel
Pir0
Expert
Posts: 1256
Joined: Tue Nov 27, 2007 9:25 pm
Location: Ireland

Post by Pir0 »

Anti roll bar tight? When going straight it's somewhat slackened than when steering, so maybe when you steer it wont budge, but when stragiht it can move.


Really is just a guess from what you've described. Worth a try though.
SAZ
---------------------
Image
Daniel
Expert
Posts: 1298
Joined: Mon May 03, 2004 8:28 am
Location: Belgium

Problem solved

Post by Daniel »

Well it was finally the right stabilizer link that had some play in it's lower ball joint. It was perhaps under tension when I checked and it I didn't find anything. Once top ball joint removed the play was obvious.

Once again thanks to the team :) .

Daniel
Locked