Installing Springs, Shocks, Struts

daewooluvr · Post by **daewooluvr** » Mon Mar 15, 2004 2:31 am

Hey Guys,
We were going to install the new suspension parts on my US spec 1.6L Lanos but cannot figure out how to go about tackling this project. Has anyone in here done it themselves and can write up a nice little how to, possibly with some diagrams.

THanks,
Shaun

TheGreatAndPowerfulOz · Mon Mar 15, 2004 3:27 am

I also need to know this when it is time to install new springs on my Lanos.

Cliff

DomWoo · Post by **DomWoo** » Mon Mar 15, 2004 3:32 am

the back shocks and springs are easy, no need for a write up on that just remove the bottom bolt and jack the sucker up and remove the top nunt and the shock is out

as for the sping , i didnt take it off

front shocks are going to be a pain in the ass and can do the springs at the same time, i have instructions on this if you want them..

i mean that in every way possible, you even have to have a took to disconnect the ball joints

DomWoo · Post by **DomWoo** » Mon Mar 15, 2004 5:55 am

front installation instructions here!!

copy and paste in your browser

www.geocities.com/woohooracing/frontshocks.zip