Front lip

Body Kits, Rims, Suspension, Wings, Lighting etc and exterior detailing.

Moderators: daewoomofo, Moderators Group

Locked
Dillon
Expert
Posts: 573
Joined: Fri Dec 16, 2005 2:58 pm
Location: Lenoir, NC
Contact:

Front lip

Post by Dillon »

I have a 2001 Nubira and am lookin for a front lip, Dose any one know where to get one or if i could get one for a difforent car that would fit with out alot of work.
User avatar
lanos2001
Expert
Posts: 4245
Joined: Thu Sep 30, 2004 9:35 pm
Location: lawton oklahoma

Post by lanos2001 »

your best bet right here. unless you want to modify a kit from another car like you said. just need to find a car that has almost the same dimensions. but its still gonna be some work. you won't find one that will just need new holes drilled. more than likely you would have to cut a kit in half and take away or add more fiberglass to it and any other part might need to be fabricated too.


nick


http://cgi.ebay.com/ebaymotors/Daewoo-N ... enameZWDVW
Image

save a tree, eat a beaver.
Dillon
Expert
Posts: 573
Joined: Fri Dec 16, 2005 2:58 pm
Location: Lenoir, NC
Contact:

Post by Dillon »

Yea i though there would be a little work i just wasent sure if there might be a car that would come really close. Any ideas on a car that would be around the same dementions?
User avatar
lanos2001
Expert
Posts: 4245
Joined: Thu Sep 30, 2004 9:35 pm
Location: lawton oklahoma

Post by lanos2001 »

hard to say. i've never really been close and personal with a nubi before. it looks like a lot of cars might be close. i would suggest to go to a walmart and pull out a tape measure and start looking. a safer way though might be to find someone you know with a car you think might work.

i would say you would need to get measurements on your woo from the wheelwell to the front of the bumper and width of course. maybe some other parts too kind hard to explain.

hope this helps


nick
Image

save a tree, eat a beaver.
Dillon
Expert
Posts: 573
Joined: Fri Dec 16, 2005 2:58 pm
Location: Lenoir, NC
Contact:

Post by Dillon »

Yea it dose thanks alot :D
User avatar
lanos2001
Expert
Posts: 4245
Joined: Thu Sep 30, 2004 9:35 pm
Location: lawton oklahoma

Post by lanos2001 »

have you had experience with fiber glass before? and not just the bondo fiberglass jelly but actual sheets of fiberglass and resin? if not your in for a learning experience. :D


nick
Image

save a tree, eat a beaver.
Dillon
Expert
Posts: 573
Joined: Fri Dec 16, 2005 2:58 pm
Location: Lenoir, NC
Contact:

Post by Dillon »

well i have used alot of fiberglass products when i was custom makin my mount for my tv...But it didnt work out so i threw it away and now i just have one of my friends do it :D
Locked