18" on a lanos...

Body Kits, Rims, Suspension, Wings, Lighting etc and exterior detailing.

Moderators: daewoomofo, Moderators Group

DubWoo
Posts: 1
Joined: Mon Jul 18, 2005 12:31 am
Location: Coldwater,MI

18s on a Lanos?

Post by DubWoo »

I HAVE 18 inch hyper black Motegi FF7s on my 2000 Daewoo Lanos S (4-door) and it looks a hell of a lot better than the 17s i had! and i still have room to drop it. Everyone thinks it looks bad as hell with those 18s on it. it doesn't set too high either, but dropping it would look better. i didnt have to cut, weld, or roll anything to put them on. i HIGHLY reccomend[/b]
User avatar
lanos2001
Expert
Posts: 4245
Joined: Thu Sep 30, 2004 9:35 pm
Location: lawton oklahoma

Post by lanos2001 »

PICS!!!!!

nick
Image

save a tree, eat a beaver.
daewoo
Posts: 44
Joined: Thu Sep 02, 2004 8:53 pm
Location: belgium

Re: 18s on a Lanos?

Post by daewoo »

DubWoo wrote:I HAVE 18 inch hyper black Motegi FF7s on my 2000 Daewoo Lanos S (4-door) and it looks a hell of a lot better than the 17s i had! and i still have room to drop it. Everyone thinks it looks bad as hell with those 18s on it. it doesn't set too high either, but dropping it would look better. i didnt have to cut, weld, or roll anything to put them on. i HIGHLY reccomend[/b]
and is the car lowered? i'm talking about a lowered car. :wink:
UK_REZ_ESSEXRACERS.COM
Junior
Posts: 126
Joined: Thu Oct 21, 2004 11:47 am
Location: essex UK
Contact:

Post by UK_REZ_ESSEXRACERS.COM »

mate, i had 17s, and the rear rubbed whenever i went over a bump. 18s...without rubbing, i jst dont belive it.

heres my car as it stands, its on 17s, and lowered 40mm. i only needed the rear arches rolled. and since that, no problems. it sits and looks just right. i got just enough clearance on the front for speed bumps etc.

here

Image
for uk street racing, check www.essexracers.com
Locked