Transmissions, Clutches, torque converters, Gear ratios, Brakes, Pads, etc.
Moderators: daewoomofo , Moderators Group
Chas Wiggins
Posts: 49 Joined: Tue Dec 23, 2003 2:33 amLocation: Metro Louisville
Contact:
Post
by Chas Wiggins Sun Sep 17, 2006 2:14 am
I'm in the process of replacing my clutch right now and noticed that the U.S. Daewoo Lanos' came with two different clutch assemblies.
One clutch is an 8 1/2inch diameter 24spline/teeth
the other is a 7 7/8inch diameter with 24 spline/teeth
My daewoo has the smaller of the two clutch assemblies. I noticed however that my flywheel would more than likely accept the bigger 8 1/2inch diameter clutch. Anyway, would putting the larger clutch disc in my car be an upgrade?
Also anyone know if the pressure plates or flywheels are any different between the two types?
TIA
1991 Galant VR4
Chas Wiggins
Posts: 49 Joined: Tue Dec 23, 2003 2:33 amLocation: Metro Louisville
Contact:
Post
by Chas Wiggins Mon Sep 18, 2006 10:03 pm
anyone know???
1991 Galant VR4
Slammed
Expert
Posts: 836 Joined: Sun Jun 20, 2004 10:02 pmLocation: CT USA
Post
by Slammed Mon Sep 18, 2006 11:21 pm
I would like to know too LOL
MMamdouh
Moderator
Posts: 7299 Joined: Wed Feb 18, 2004 8:33 amLocation: Cairo, Egypt
Contact:
Post
by MMamdouh Tue Sep 19, 2006 9:22 am
no idea... sorry.
chronoti
Junior
Posts: 137 Joined: Mon Oct 17, 2005 2:05 amLocation: st.pete, fl
Contact:
Post
by chronoti Tue Sep 19, 2006 1:02 pm
take it to a tranny shop most of the time they can just look and do a few messurements and be able to tell you if it can hold a 8 1/2 or not.
Chas Wiggins
Posts: 49 Joined: Tue Dec 23, 2003 2:33 amLocation: Metro Louisville
Contact:
Post
by Chas Wiggins Tue Sep 19, 2006 5:09 pm
Went ahead and ordered a 7 7/8th just to be on the safe side. Thanks anyway guys/gals.
1991 Galant VR4
