Brake in Lanos

[SerUkraine]

Hello. I am from Ukraine. I have lanos.Can I ask ? how kide of brake I can install in Lanos.

[GsiTurbo]

Are you trying to ask what kind of brake upgrades are available for the Lanos, or how to change the brakes?

[SerUkraine]

I, just asking, maybi You now someshing new about brake for Lanos.
I just swap stok brake from Vectra A in Lanos. But I want more.
[/URL]
[/img]
[/URL]
[/img]

[MMamdouh]

you are one step ahead of me man

i already done the front brake upgrade on my lanos and my front rotors are the same ones that are used on vectra... i recon at this point you will have to go custom kits if you want more brakes on the front or perhaps get high performance rotors of the same measurements from EBC or so

Note: make sure you are using the master brake cylinder marked 22 rather than the one marked 20 or else you will have elongated pedal travel, te 22 master is found on daewoo nubira

for the rear... i was going to get the same brake components last week but i got stuck at work and i will probably get them this weekend

MMamdouh

[GsiTurbo]

Hello. I am from Ukraine. I have lanos.Can I ask ? how kide of brake I can install in Lanos.

Going back to the original question, the easier upgrade for you would be 288mm front rotors/calipers from Vectra. If you plan on keeping current brakes, try some drilled or slotted front rotors with some pads from higher shelf - sport version.

MMamdouh => the canadian version Lanos came with 3 front brake types:
- Teeves (spellin?)
- DAC
- ATE
Disc rotor, for all, is 236mm. If your car is using 256mm stock, leave the stock pv's.

posts related to MMamdouh's rear disc conversion are split into new topic:

http://www.daewootech.com/forum/viewtop ... =3&t=11407

Forum moderator

[MMamdouh]

check DBA rotors P/N DBA 891SL & DBA 891SR

check brembo max P/N 09.5148.76

MMamdouh

[RomaRovno]

Sorry my nickname is dead. I register new.
Now I have 288mm brake from Vectra B and cilinder from Nubira 1 22 mm.

[MMamdouh]

nice work man... that is my second step in brakes upgrade but i won't do it until i do some serious HP upgrade (engine swap or turbo) as my current setup is good enough for the current power level

MMamdouh

[RomaRovno]

I sold my K16, and everything else, he ordered rods, injectors, pump, pressure regulator and the turbine, I want to become off 450