parts request & new product previews

gse_turbo · Post by **gse_turbo** » Thu Nov 01, 2007 5:55 pm

i will be posting topics for each individual parts as they come up or as soon as i can get pics up for them.

for parts that aren't listed yet or available yet please make all requests here to keep things simple.

garrett

gse_turbo · Post by **gse_turbo** » Thu Nov 01, 2007 7:12 pm

just for a heads up on parts to come...

•Z20LET MLS head gaskets, first shipment should be in at the end of Nov. .051 $100US
•9 puck dual-friction clutch, ceramic on pressure plate and fiber-tough on flywheel (3/4"x24s and 1"x14s) $120US
•front motor mount for 2.0/2.0 swaps into a lanos, lemans, kadett, astra... $90US
•power steering relocation bracket $90US
•strut brace for lanos
•strut brace for lemans
•strut brace for forenza/reno
•braided stainless brake lines for most chassis

hopefully some of these parts will spark an interest.

pre-orders or requests for these parts will also be taken. most of the MLS gaskets are sold, another shipment will be coming shortly after.

garrett

greenbluewoo · Post by **greenbluewoo** » Thu Nov 01, 2007 8:53 pm

I interested in the front mount for the lanos

gse_turbo · Post by **gse_turbo** » Thu Nov 01, 2007 8:57 pm

the bracket will be ready to ship SOON, if you'd like to get a price on shipping PM me with you address.

garrett

PS: i've been trying to find the pics of it here on the forum but i may have to post new ones tomarrow.

gse_turbo · Post by **gse_turbo** » Thu Nov 01, 2007 9:52 pm

pretty soon i'll start working on intake and exaust flanges for the 1.6 DOHC as well as a true short shift kit

you guys let me know what you think is the most important and what you think needs to be done first.

garrett

Slammed · Post by **Slammed** » Thu Nov 01, 2007 11:19 pm

The Clutch is for the Lanos??

greenbluewoo · Post by **greenbluewoo** » Thu Nov 01, 2007 11:40 pm

pm sent

gse_turbo · Post by **gse_turbo** » Thu Nov 01, 2007 11:45 pm

Slammed wrote:The Clutch is for the Lanos??

yes the clutch is for the lanos also but keep in mind that at this point it is clutch plate only.

garrett

gse_turbo · Post by **gse_turbo** » Tue Nov 06, 2007 7:27 pm

just fine tuning the main support for the T20/U20 motors as well as an oil pan flange.

i've always offered main supports for the older motors but now i will have one for the iron ecotecs as well $110 shipped (on main land)

new pics will be up soon, here is the older main support fo rthe time being.

garrett

jidasas · Post by **jidasas** » Wed Nov 28, 2007 10:13 pm

I would like a front strut brace for my lanos...no hurry though with Christmas being so soon and all.

Jimmy

gse_turbo · Post by **gse_turbo** » Wed Nov 28, 2007 10:20 pm

jidasas wrote:I would like a front strut brace for my lanos...no hurry though with Christmas being so soon and all.

Jimmy

should be no problem

Nubira2.2 · Post by **Nubira2.2** » Thu Nov 29, 2007 1:30 am

how much for braided stainless brake lines for a Nubira 1?

gse_turbo · Post by **gse_turbo** » Thu Nov 29, 2007 6:41 pm

Nubira2.2 wrote:how much for braided stainless brake lines for a Nubira 1?

i'll have to look into that one, all i have lines from right now are the Lemans/ Lanos and the Forenza/Reno.

being as the Forenza is the "newer" Nubira, do you know if the lines are the same?

gse_turbo · Post by **gse_turbo** » Thu Nov 29, 2007 7:07 pm

just an update... parts in the works are...

• Main support for the T20/U20 motors ($108) CLICK HERE
• Main support for the C20 motors ($108) CLICK HERE
• oil pan flange for the C20, T20/U20/T22/U22 motors (aluminum or steel) (price to be desided)
• intake and exaust flanges for the 1.6 DOHC (prices will be that same as similar motors)
• a true Quick shift kit, will fit most transmission accept the F28
• Z20LET MLS head gaskets, .051 $100US CLICK HERE
• Carbon/Kevlar clutch kits w/ pressure plate and bearing (3/4"x24s and 1"x14s) $265 CLICK HERE
• front motor mount for 2.0/2.0 swaps into a lanos, lemans, kadett, astra... $90US
• power steering relocation bracket $90US
• strut brace for lanos
• strut brace for lemans
• strut brace for forenza/reno
• braided stainless brake lines for most chassis(Lanos/Lemans, Forenza/Reno to start)

let me know what parts you guys think are most imortant and i can push some of the other stuff aside for now

jidasas · Post by **jidasas** » Thu Nov 29, 2007 9:54 pm

Because of my car being a lanos I would like you to concentrate on the lanos strut braces and such...however, I believe from a business point of view that you would be better working on the Suzuki Forenza/Reno stuff first since there is a bigger market there. I didn't vote for that reason.

Jimmy