The original daewootech forum

Turbosmart Boost Tee is one of the simplest products to install but surprisingly quite a number of DIY enthusiasts get it wrong. The most common installation mistake is reversing the boost flow - or - installing the Boost Tee back to front. The Boost Tee should be mounted between the pressure source and the wastegate actuator. The boost flows from the pressure source to the wastegate actuator and should correspond with the arrow symbol on the face of the Boost Tee.


JOHN_TRICKLE
Daewoo Lanos 1.5L SOHC, TD04L @ 7psi