The original daewootech forum

LANOS SERVICE MANUAL
http://storeandserve.com/download/39546 ... l.rar.html
***note: there are approx. 150 missing pages from the ENGINE CONTROLS section. these are the trouble shooting for things like, laggy engine, sputtering, etc. if you have a problem with the engine acting up, post and i will look up the solution in the paper manuals.

READ BELOW FOR THE MANUAL TRANSMISSION AND CLUTCH SECTIONS

FORENZA/RENO/LACETTI SERVICE MANUAL
http://storeandserve.com/download/40449 ... l.rar.html


merry christmas my fellow lanos owners



COMMING SOON: NUBIRA and NEXIA/RACER/CIELO

i used to think Santa doesn't exist... turns out it does and apparently he drives a Daewoo just like we do :lmao:

MMamdouh

updated and cleaned out

Hello. Don't suppose you could post some of the pages on the manual transmission could u? As only the automatic lanos pages are in that manual. I really just need instructions on how to drain and refill manual tranny oil in my 1.5 Cielo.

Cheers

i sincerely appologize!!! i found them... the clutch and the manual tranny section... here they are...

http://www.daewootech.com/users/audacit ... bl3_5b.pdf <~ Manual Section


http://www.daewootech.com/users/audacit ... bl3_5c.pdf <~ Clutch Section



again, i am TERRIBLY sorry!!!

you can just add these directly into the file and they'll go where they are supposed to

No need to be sorry! I am most appreciative that you posted the manual for everyone. It is really hard to find accurate documentation on Daewoos nowadays. Thanks heaps! Cheers!

I downloaded the manual but its in a RAR format and I couldn't get a tool to read the file that worked.

Does it exist in a diff format any where you know of?

Or do you now where I can download the software to read that format?

What I need is a diagram or pic of what the strut looks like apart, daily driver so I don't have the time to take the strut out of the car to take pics.

merry christmas
http://www.rarlab.com/rar/wrar351.exe


the program is called winrar. it also functions as a zip file opener. rar files are basically the same thing a s a zip, with better compression.

Sweet.

By the way thanks for the posts you do. I am going to do the motor mounts with the window weld. Soon as I put the power in the engine jumps so bad it broke the flex pipe on the exhaust and bangs the intake off the hood when you start it.

here is a link to my ridehttp://www.suzuki-forums.com/2004-Suzuk ... -cid29.htm
Its not up to date because a smuck stole my camera.

if you did that then i suppose the current mounts are busted... better get new ones and treat them with silicon (window weld) and you will feel the difference.

MMamdouh

I pulled the dog bone and those were ok but sadly I have to deal with some strut issues first.

I was coming around a curve and found a 6" dia dead tree across the highway the hit ruined a rim but at the time eveything with the suspension looked good but after a few high speed potholes and ripples in the asphalt the mount and bearing on that side are shot and the other side is showing some wear. My habit of treating an empty expressway as my own personal autobahn is catching up with me.

hi i tried downloading the manual because i need it but it would not open do you know why or how i can get the manual from you i could really use it

do you have Winrar?

MMamdouh

Audacityracing wrote:
FORENZA/RENO/LACETTI SERVICE MANUAL
http://storeandserve.com/download/40449 ... l.rar.html

Dang, they dont have the 2.0 in there.

Is there a nexia workshop manual available?