custom turbo for the Nubi

jmreaper · Post by **jmreaper** » Sun Dec 09, 2007 1:54 am

has any one put a tubro on the 2.2 dohc nubi? and is there a custom set up or is there any other apps, that i can use????

jmreaper · Post by **jmreaper** » Sun Dec 09, 2007 1:59 am

now how many cats is on my car, and once i get a header can i change that make my own custom exhaust

Audacity Racing · Post by **Audacity Racing** » Sun Dec 09, 2007 2:08 am

Car has 2 cats.

Any manifold for the 2L Daewoo engines will work and there are turbo manifolds out there.

Did you swap the 2.2L into your Nubira?

jmreaper · Post by **jmreaper** » Sun Dec 09, 2007 2:30 am

no its factory as far as i know, i bought the car from a dealer, it hauls ass but i got a turbo from my friend its a toyta ct26 from a supra, so its going 2 b all custom im just tryin 2 find someone 2 give me pointers

Audacity Racing · Post by **Audacity Racing** » Sun Dec 09, 2007 2:31 am

It's odd to have a 2.2L in a Nubira...

anyway, talk to kinkyllama about a manifold. You'll have to get a custom turbo flange to mount it though

jmreaper · Post by **jmreaper** » Sun Dec 09, 2007 2:43 am

i was going 2 make one for it cause my bro is a certified welder im sure he can weld it up

Audacity Racing · Post by **Audacity Racing** » Sun Dec 09, 2007 2:45 am

You could buy a head flange from Garrett and a turbo flange from where-ever and get him to weld you a manifold... would be cheaper in the long run since you have to do a custom flange anyway...

Link to Garrett's flanges...
http://www.daewootech.com/forum/viewtopic.php?t=9563

jmreaper · Post by **jmreaper** » Sun Dec 09, 2007 2:53 am

well is there any post on here that any one has made the custom header or has specs and the bends i need, cause the toyota ct26 is pretty big, so i dont know wat 2 do

Audacity Racing · Post by **Audacity Racing** » Sun Dec 09, 2007 3:05 am

A custom setup won't have the same bends as anyone else anyway.

There are a couple guys with various 2L turbo setups...

jmreaper · Post by **jmreaper** » Sun Dec 09, 2007 3:07 am

couple of pics didnt show, but i hope i can do something with this turbo i dont c y i couldnt make it work cause cant i use the same set up from that supra i mean i have 2 make the flanges right

Audacity Racing · Post by **Audacity Racing** » Sun Dec 09, 2007 3:21 am

I hate to break it to you, but that turbo is WAY too big for the Nubira engine. 10psi out of that thing only pushes about 19lbs/min @ a pressure ratio of 1.7... just barely in the effcient area and that's not making boost until about 4000 RPM. You'd have to upgrade internals to be able to use that worth anything. It's just too big.

If you want to try it, you can...

You need the flange I linked you to from Garrett and this flange

(note: I found that online, but cannot verify dimensions. If found to be incorrect... it's not my fault)

Garrett can cut those too

jmreaper · Post by **jmreaper** » Sun Dec 09, 2007 3:24 am

well it has sermic blades and has been upgraded cuase he change some things around b4 i got it

Audacity Racing · Post by **Audacity Racing** » Sun Dec 09, 2007 3:24 am

That makes the issue worse dude... you won't make boost

jmreaper · Post by **jmreaper** » Sun Dec 09, 2007 3:36 am

c his car spooled up around 2.5 hun and his engine was out of a mr2

jmreaper · Post by **jmreaper** » Sun Dec 09, 2007 3:40 am

and his was a 2.0 my enigne is a 2.2

The original daewootech forum

custom turbo for the Nubi

custom turbo for the Nubi

nubi exhaust