leganza turbo
Moderators: daewoomofo, Moderators Group
-
Lostinconformiti
- Posts: 30
- Joined: Sat May 07, 2005 4:32 am
- Location: Camas, Washington
- Contact:
leganza turbo
what is the most psi i can put into stock internals in a leganza. becuase im going turbo!so i need to know the most psi i can put in safely to the leganza 2.2L engine. thanx guys.
soon to have my daewoo back on the road.
-
Brian5475E
- Expert
- Posts: 753
- Joined: Tue May 11, 2004 2:49 am
- Location: Cincinnati, Ohio USA
- Contact:
-
GsiTurbo
- Super Moderator
- Posts: 1791
- Joined: Thu Mar 13, 2003 10:56 pm
- Location: Edmonton, Alberta, Canada
- Contact:
7-10 psi will do fine, if the following are met (ABSOLUTELY REQUIRED)
- pistons are ceramic coated
- engine is in GOOD ORDER prior to conversion
- replace headgasket, if the current one is seeping through
- ARP conrod bolts
- Intercooler
- keep stock RPM cut-off
ENGINE MUST BY PROFESSIONALLY DYNO-TUNED TO ENSURE SAFE AIR-FUEL RATIO AND CHECKED FOR PINGING (DETONATION)
Then you are off to the races
Let us know if we may assist.
- pistons are ceramic coated
- engine is in GOOD ORDER prior to conversion
- replace headgasket, if the current one is seeping through
- ARP conrod bolts
- Intercooler
- keep stock RPM cut-off
ENGINE MUST BY PROFESSIONALLY DYNO-TUNED TO ENSURE SAFE AIR-FUEL RATIO AND CHECKED FOR PINGING (DETONATION)
Then you are off to the races
Let us know if we may assist.
__________________________
2002 Lanos 1.5 SOHC... stock!!!