Want to order forged pistons 76,5mm. I need your help.

Rovsche · Post by **Rovsche** » Wed Jul 09, 2008 9:37 am

Friends,

please help me to place order for custom forged pistons fabricaiting on the one of famous fabs e.g. CP, Wiseco etc. What one from this you can recomend me?

piston must handle 150hp at least.

Pir0 · Post by **Pir0** » Wed Jul 09, 2008 3:03 pm

Stock pistons will probably handle 150hp. With arp rod bolts to be safe.

Garrett off this site, known as gse_turbo on the forum, has done a large group buy with Wiseco and everyone that ordered them seemed super happy with the product.

Ask him when he comes online, or send him a PM.

Jwoo · Post by **Jwoo** » Wed Jul 09, 2008 10:12 pm

what engine are the pistons for?

Pir0 · Post by **Pir0** » Wed Jul 09, 2008 10:59 pm

Any engine, you say the size and compression ratio you'd like, then specify whether its a floating pin or a presed pin, which, in your case, is a pressed pin.

[edit] just realised you're not the OP. Jusging by his other post asking about a billet crank for a 1.5 Nexia engine, i'd say it'd be for the same engine.

gse_turbo · Post by **gse_turbo** » Thu Jul 10, 2008 4:45 pm

I can get you the pistons you need, just let me know all the specs that pistons need to be... piston pin diameter, compression and so on.

Garrett