I was just doing some searching for some stuff and came across this site. It looks like they sell some pretty neat stuff. Check it out...
http://www.autosprint.co.uk/?p=p_1
Anyone ever heard of Autosprint??
Moderators: daewoomofo, Moderators Group
-
gse_turbo
- DTM Daewoo Mod
- Posts: 2394
- Joined: Fri Jun 23, 2006 4:20 am
- Location: Englewood, Colorado United States
- Contact:
Nice find unfortunetly most of those parts wont work on our motors. the ones that are listed as "Redtops" are the engine generation before our (Iron) "Ecotecs".
For example, the flywheels wont work because the Redtop uses 8 bolts and and the Ecotecs use 6 bolts (like the early 8v motors). If you use the steel crank you will have to use a Redtop flywheel which is no big deal I have them available from Fidanza. The crank would be $1,708.72 and the flywheel would be $420.00 +postage.
the rods will work but they are $625.86 +postage (which reall isn't too bad)
they do have a cam set for the VXR motor they are $685.47 +postage for the pair.
the pistons are $993.44 +...
what I'm impressed with (if they are right) is the dual valve springs, $193.72 +... for a set. that is very well worth the cost...
...for that it's a nice find.
Garrett
For example, the flywheels wont work because the Redtop uses 8 bolts and and the Ecotecs use 6 bolts (like the early 8v motors). If you use the steel crank you will have to use a Redtop flywheel which is no big deal I have them available from Fidanza. The crank would be $1,708.72 and the flywheel would be $420.00 +postage.
the rods will work but they are $625.86 +postage (which reall isn't too bad)
they do have a cam set for the VXR motor they are $685.47 +postage for the pair.
the pistons are $993.44 +...
what I'm impressed with (if they are right) is the dual valve springs, $193.72 +... for a set. that is very well worth the cost...
...for that it's a nice find.
Garrett
-
PrecisionBoost
- Super Moderator
- Posts: 4437
- Joined: Thu Jun 19, 2003 5:59 am
- Location: Edmonton, Alberta, Canada