Intimidator's tuning parts

[Deathwind]

On this topic. The Intimidator's tuning parts will be listed.

How to order

1. Post a new topic of what you want to order

2. We'll provide you the prices and shipping charges.

3. After that send us the money either through the bank acount or by air mail with checks.

Our bank acount

swift code : KOEXKRSE

Bank name : KOREA EXCHANGE BANK

TEL : 011-9762-6191

4. After the money has arrived. We will send you products.

[Deathwind]

Final gear ratio for Lacetti manual transmission
You can change the final gear ratio (hereinafter f.g.r) of your Lacetti M/T
It is difficult to get other special f.g.r except Daewoo genuine parts
We recommend to change f.g.r from the existing stock because of high cost
The close transmission is equipped on Lacetti, but accelerating force can go down with reason of f.g.r (3.550)
you can get higher accelerating performance from the change of f.g.r in 3 versions.

1) 3.722
Accelerating and torque can be improved (5th 6500rpm - 221km/h)

2) 3.944
Accelerating and torque can be improved (5th 6500rpm - 208km/h)

3) 4.176
Accelerating and torque can be improved (5th 6500rpm - 197km/h)

Sales price 400,000 WON(around 400 USD)

[Deathwind]

Intimidator high cam shaft for Daewoo 1.5 & 1.6 DOHC

Intimidator high cam shaft for Daewoo 1.5 & 1.6 dohc
Made by WEBCAM in U.S
It is available for Lanos, Nubira, Lacetti

------------------------------------
valve timing information
------------------------------------
: in : ex :
------------------------------------
valve lash : stock : stock :
------------------------------------
valve lift : .387 : .387 :
------------------------------------
duration : 238 ˚ : 238 ˚ :
------------------------------------
duration @.50 : 206 ˚ : 206 ˚ :
------------------------------------
lobe center : 110 ˚ : 110 ˚ :
------------------------------------

Intake open angle -7˚ before tdc Exhaust 33˚ before bdc
Intake close angle 33˚ after bdc Exhaust -7˚ after tdc

Valve timing is checked with zero valve lash @.50 inches of valve lift

Sales price 1.199,000 WON

(The graph showing data of the Chassis dynamometer
and it would be slightly changed by the various factors
It is confirmed as Approx. 162hp when it appeared by the motor company)

[Deathwind]

Urethane mount for Daewoo 1.5 & 1.6

When you shift gears, the loss of power transmission can be reduced, minimizing vibration on the body

Available for old models (Lemans,Cielo,Nexia) and Lanos 1 & 2

3 pcs are needed for engine and transmission, Sales price 80,000 WON each.[/list]

[Deathwind]

Intimidator Clutch cover & Disk

Reinforced clutch cover and Solid type of clutch disk in O.D 225mm

Clutch cover has 1,000 kgf/㎠ of pressure, Disk containing ceramic material with no springs for

shock-sbsorbing, so it appears much better performance without any loss.

It has special feature of soft feeling when you step on clutch in comparison with pressure.

Available for Lanos, Nubira(1,2), lacetti, Rezzo, Leganza, Magnus(I4)

Sales price 500,000 WON

[Deathwind]

Lacetti's lowering springs

It is harden 30% more and lowers 2cm.
It's made by SMA(Korean company)

Prices will be soon written.

[Deathwind]

This is also made by SMA.
The price is around 1200 USD(As soon as we find out exact price. We will write it here)

[Deathwind]

Adapter for Oil-cooler (Daewoo only)

It is Adapter of Oil-cooler for Daewoo only.

Sales price 70,000 WON(around 70USD) (Adapter only)

[Deathwind]

Intimidator Oil Catch Tank (Daewoo only)

This is Intimidator Oil Catch Tank for Daewoo motors only.

There are only 2 lines of Blow-by gas on the current product for other car makers.

But 3 lines are needed for Daewoo, it should have 2 of Blow-by gas and 1 of Return.

In the above picture, The big hole is for the Blow-by gas of main line, and small hole is for the

compensation of idle. and the other small one is return line into the aspirator.

Oil can be vented from the under plug. a little small size of 80mm O.D and 120 mm height.

Sales price 60,000 won(around 60 USD)

Thank you

[Deathwind]

Quickshifter for Daewoo Manual Transmission

This is a quickshifter for Daewoo. It does not shorten the gear stick but it shortens the length between Neutral position and 1st~5th position.

Around 120 USD.

[Deathwind]

Gear shift guide control bushing

Made from Urethan material.

Stronger than existing rubber O-ring and spacer, tight positioning in Neutral.

Available for all Daewoo manual transmission.

Sales price 10,000 WON(around 10 USD) / 1 set (2 pcs)

[Deathwind]

Intimidator's custom Metal Gasket

We offer all kinds of Metal Gasket for engines 1.5, 1.6, 1.8, 2.0, 2.2 made by Daewoo.

n/a Engine : 0.9T 메탈가스켓(1.8, 2.0, so, do)

Turbo Engine : 1.6T, 1.8T, 2T 메탈가스켓(1.5, 1.8, 2.0, so, do)

120,000 WON(around 120 USD)

[Deathwind]

There are 3 types out of 5 speed gear ratio as Daewoo genuine parts.
and 4 types of final gear ratio (hereinafter f.g.r) can be assembled here.
so, We can make special transmission to meet your driving taste and performance of your engine.

-----------------------------------------------------------
1) Type wide
-----------------------------------------------------------
(position : ratio) 1st : 3.545 / 2nd : 1.952 / 3rd : 1.276 / 4th : 0.892 / 5th : 0.707

You can choose one of f.g.r among 3.550 / 3.722 / 3.944 / 4.176

-----------------------------------------------------------
2) Type medium
-----------------------------------------------------------
(position : ratio) 1st : 3.545 / 2nd : 2.048 / 3rd : 1.346 / 4th : 0.971 / 5th : 0.763

You can choose one of f.g.r among 3.550 / 3.722 / 3.944 / 4.176

-----------------------------------------------------------
3) Type Close
-----------------------------------------------------------
(position : ratio) 1st : 3.545 / 2nd : 2.158 / 3rd : 1.478 / 4th : 1.129 / 5th : 0.886

You can choose one of f.g.r among 3.550 / 3.722 / 3.944 / 4.176

===========================================================

These specially combined gear ratio enhance maximum speed or give you higher accelerating force.
so You should consider what you want, levels of tune for your car, driving envirnoment (either streets or highway), etc...

The parts are available for all Daewoo cars.
Sales price: 1,000,000 WON(around 1,000 USD)

===========================================================

[Deathwind]

Intimidator big-bored throttle body for 1.5L or 1.6L

This is remachined from genuine parts
Available for Daewoo 1.5L & 1.6L engine
The genuine parts has 50mm of inner diameter,
but you can take 58 or 65mm of inner diameter with your choice.
Gasket included.
Sales price 150,000 WON(around 150 USD)

[Deathwind]

Intimidator high cam shaft for Daewoo 1.8 & 2.0 liter engine

Made by WEBCAM in U.S

------------------------------------
valve timing information
------------------------------------
: in : ex :
------------------------------------
valve lash : stock : stock :
------------------------------------
valve lift : .352 : .352 :
------------------------------------
duration : 230 ˚ : 230 ˚ :
------------------------------------
duration @.50 : 200 ˚ : 200 ˚ :
------------------------------------
lobe center : 110 ˚ : 110 ˚ :
------------------------------------

Intake open angle -10˚ before tdc Exhaust 30˚ before bdc
Intake close angle 30˚ after bdc Exhaust -10˚ after tdc

Valve timing is checked with zero valve lash @.50 inches of valve lift

Sales price 1.199,000 WON

(The graph showing data of the Chassis dynamometer
and it would be slightly changed by the various factors
It is confirmed as Approx. 184hp when it appeared by the motor company)