turbo pistons to fit a C20GET (c20let in the uk)

16vastraturbo · Post by **16vastraturbo** » Tue Jan 01, 2008 9:27 pm

easy dudes am after some brand new pistons to fit the model above^ any ideas where i can get some from or is any one selling any???

Audacity Racing · Post by **Audacity Racing** » Tue Jan 01, 2008 10:03 pm

http://www.daewootech.com/forum/viewtopic.php?t=9592

16vastraturbo · Post by **16vastraturbo** » Tue Jan 01, 2008 10:09 pm

ye ive notice that early and sent him a pm and waiting for a reply, do you know anywhere else i can get some from, over here its disgusting how much they charge?

Audacity Racing · Post by **Audacity Racing** » Tue Jan 01, 2008 10:23 pm

Garrett (the guy selling those) has sent off the needed measurements to Wiseco, they could easily make you a set for around $600 US I'm guessing...

Post by **PrecisionBoost** » Wed Jan 02, 2008 1:52 am

C20GET pistons are different than C20LET pistons ...... LET uses a floating pin where as a GET is a press pin design

Wieseco allready makes C20LET forged pistons for $479 a set.

http://www.importperformanceparts.net/

Go to Opel for application.... and you will find they have Ross and Wieseco for under $500 USD

If I were you I'd buy three or four sets and then sell them on EBAY UK or MIGWEB to make your money back.

16vastraturbo · Post by **16vastraturbo** » Wed Jan 02, 2008 2:48 am

my standerd let pistons never had a floating pin they were press fit?

Pir0 · Post by **Pir0** » Wed Jan 02, 2008 11:29 am

They weren't standard let pistons then

mocpac · Post by **mocpac** » Wed Jan 09, 2008 2:41 am

First. I have the pistons from GSE turbo sorry men.

second. You can use the press pistons in floating rods and viseversa.... We have a set of nubira rods with c20xe pistons. They are now press...