Ivan's Nexia project (Czech Republic)

JohnnyC · Post by **JohnnyC** » Sat Mar 25, 2006 1:48 pm

Wow... very nice. I hope to get a similar engine someday! How soon until you plan on doing the swap?

IvanCZ · Post by **IvanCZ** » Sat Mar 25, 2006 4:35 pm

I hope I'll be able to go 1/4 mile next saturday

There's a lot of work.. I think a few members know what I'm talking about...

IvanCZ · Post by **IvanCZ** » Mon Mar 27, 2006 9:16 pm

Hello, new photos:

still working on it...

racer95 · Post by **racer95** » Mon Mar 27, 2006 11:23 pm

hello guys,anyone know how much money i need to get an opel engine(2.0 or 2.2)for my racer
i want to know what is the most suitable to my racer.

racer95 · Post by **racer95** » Mon Mar 27, 2006 11:44 pm

ivan give us informations about ur engine.

Post by **Efratech** » Tue Mar 28, 2006 6:05 am

the same chasis as mine... high 15s

what gear box are u using?

IvanCZ · Post by **IvanCZ** » Tue Mar 28, 2006 10:06 pm

racer95: it's ce20xe from Opel Kadett

Efrain A.: I have F16, despite the fact the original to ce20xe is F20.

IvanCZ · Post by **IvanCZ** » Sun Apr 09, 2006 11:58 am

Hello,

with my new engine I was 4th in the 2000 ccm cathegory in 1/4 mile:

Here you could see the video with 205 HP Honda:

http://www.ebrieta.com/nexia/videa/nexiaxhonda.avi (2,6 MB)

Chester · Post by **Chester** » Fri May 05, 2006 9:58 pm

Ivan,
I see that Your Nexia is gradually getting similar to mine

I thing the time 15,5 in my case is better about 1 second, but in my car is probably 'little' more power

In next season I'm pointing less than 14 seconds.

bluesheepbrian · Post by **bluesheepbrian** » Mon May 08, 2006 12:30 am

Nice work. Looks great. I like to bring my ride up to that standard.

IvanCZ · Post by **IvanCZ** » Tue May 09, 2006 2:21 pm

Chester wrote:Ivan,
I see that Your Nexia is gradually getting similar to mine
I thing the time 15,5 in my case is better about 1 second, but in my car is probably 'little' more power
In next season I'm pointing less than 14 seconds.

Hi Chester, I wrote you many e-mails, but you don't answer

In mail I wrote you the same - that our Nexias are very similar...

I know that the time isn't great, but the track was longer then is usual. Normally my time is about 14,8 s.

Every race is individual and it's better to compare the order not the time... (there are different conditions)...
I hope I'll meet you in some meeting, so we could compare our Nexias

What about your RAM-Induction by Lexmaul? - Is it good purchase?

Actual foto:

Chester · Post by **Chester** » Wed May 10, 2006 8:45 am

Hi Chester, I wrote you many e-mails, but you don't answer In mail I wrote you the same - that our Nexias are very similar...

I received only 1 mail from you and I answered for it.

I hope I'll meet you in some meeting, so we could compare our Nexias

With really pleasure

What about your RAM-Induction by Lexmaul? - Is it good purchase?

Lexmaul adds some power but only after mapping. For stock map there is almost no difference (except sound

).[/quote]

IvanCZ · Post by **IvanCZ** » Wed May 10, 2006 6:02 pm

Oh, I didn't receive your answer

never mind

My ECU program is not the original one - that's why there's about 180 HP in my Nexia.

I'm going to buy Lexmaul RAM, too.

P.S. Please insert photo of your Nexia here to see how are our Nexias similar

Chester · Post by **Chester** » Wed May 10, 2006 8:38 pm

IvanCZ wrote:
My ECU program is not the original one

OK, but it must be mapped specially for Lexmaul

IvanCZ wrote:...that's why there's about 180 HP in my Nexia.

I would not be so optimistic. Is that result proved or thats your feeling? (have you been on dyno?). Better check it

What have you done with your engine that it has ~180HP? Did you rebulit it? ECU, intake and exhaust would not add you 30hp I suppose (if you have 150 in stock

).
Photo will be soon.

Rodd1s · Post by **Rodd1s** » Wed May 10, 2006 9:33 pm

what software did you guys use for your ECU remapping? or did you take it to a shop with a dyno/rolling road and have them do it?